Panasonic PV-GS400 User Guide

Page of 102
Recording Mode
32
ª To Take Close-up Shots of Small 
Subjects
(Macro Close-up Function)
When the zoom magnification is 1
k, the 
Camcorder can focus on a subject that is as close 
as approximately 1.6 inches (4 cm) from the 
Lens. Small subjects like insects can be recorded 
with this function.
ª To Use the Tele-Macro Function
With the zoom magnification of 12
k, the 
Camcorder can bring the subject into focus as 
close as approximately 19 inch (50 cm) from the 
Lens. Focusing only on the subject and displaying 
the background out of focus makes the picture 
more impressive.
1
Press the [TELE MACRO] Button 
.
≥The zoom magnification is temporarily set to 
12
k and the subject can be focused on as 
close as approximately 19 inch (50 cm).
≥The [
] Indication appears.
2
Press the Recording Start/Stop Button 
or the [PHOTO SHOT] Button 
To Cancel the Tele-Macro Function
Press the [TELE MACRO] Button (in this case, 
the zoom magnification is not restored). Or push 
the [W/T] Lever.
ª To Use the Zoom Microphone 
Function
Along with the zooming operation, the 
microphone’s directional angle and sensitivity are 
varied for recording sounds.
≥Set [TAPE RECORDING MENU] >> 
[RECORDING] >> [ZOOM MIC] >> [ON]. (The 
[
] Indication is displayed.)
≥For other notes concerning this item, see 
TELE
MACRO
T.MACRO
T.MACRO
T.MACRO
T.MACRO
PHOTO
SHOT
Z.MIC
Z.MIC
Z.MIC
Z.MIC
Digital Zoom Function
This function is useful when you want to record 
close-up shots of subjects located beyond a 
normal zoom range of 1
k to 12k magnification. 
With the Digital Zoom Function, you can select a 
magnification from 30
k up to 700k.
1
Set [TAPE RECORDING MENU] >> 
[CAMERA] >> [D.ZOOM] >> [30
t] or [700t].
≥30k: Digital zooming to 30k
≥700k: Digital zooming to 700k
2
Push the [W/T] Lever 
 towards [W] or 
towards [T] to zoom in or out.
To Cancel the Digital Zoom Function
Set [TAPE RECORDING MENU] >> [CAMERA] 
>> [D.ZOOM] >> [OFF].
≥For other notes concerning this item, see 
.
Image Stabilizer Function
If the Camcorder is shaken while recording, the 
camera shake in the image can be corrected.
≥If the Camcorder shakes too much, the images 
may not be stabilized.
1
Set [TAPE RECORDING MENU] or 
[CARD RECORDING MENU] >> [CAMERA] 
>> [EIS] >> [ON].
≥The [EIS] Indication appears.
MENU
STILL
FADE
ENTER
30
tW
T
D.ZOOM
W
T
VOL/JOG
MENU
STILL
FADE
ENTER
EIS
PV-GS400Eng.book  32 ページ  2004年6月4日 金曜日 午後3時17分