Panasonic PV-GS400 User Guide

Others

If any one of the following indicators lights up or 
flashes, please check the condition of the 
Camcorder.
3DEW (DEW DETECT/EJECT TAPE):

Condensation has occurred. 

Y (CHECK REC TAB):

The accidental erasure prevention switch on 
the inserted Cassette is open (that is, set to 
[SAVE]).
You are attempting Audio dubbing or Digital 
dubbing on a Tape while setting the 
accidental erasure prevention switch to 
[SAVE].

Y (TAPE NOT INSERTED):

No Cassette in inserted. 

6 (LOW BATTERY):

The Battery is low. Recharge it. 

0: The built-in battery is low. 

: (NEED HEAD CLEANING):

The video heads are dirty. 

2END (TAPE END):

The Tape came to an end during recording.

REMOTE (CHECK REMOTE MODE):

Wrong Remote Controller Mode has been 
selected. 

UNPLAYABLE TAPE
(OTHER FORMAT):

You are attempting to play back a tape 
section that has been recorded with a 
different TV system.

UNABLE TO A.DUB
(LP RECORDED):

Because the original recording was done in 
LP Mode, audio dubbing cannot be 
performed.

INCOMPATIBLE TAPE:

This cassette is incompatible.

PUSH THE RESET SWITCH:

Irregular mechanism is detected. Use 
projection on the Lens Cap to press the 
[RESET] Button (

). This may solve the 

problem.

CARD FULL:

Card does not have sufficient memory 
remaining.
Select Picture Playback Mode and delete 
unnecessary files.

NO CARD:

Card is not inserted.

NO DATA:

There are no recorded files on the Card.

UNPLAYABLE CARD:

You are attempting to play back data which 
is not compatible with this Camcorder.

CARD ERROR:

The Card is not compatible with this 
Camcorder.

COPY INHIBITED:

Because the media is protected by a copy 
guard, images cannot be recorded correctly.

CANNOT USE USB
CHANGE MODE:

The USB Cable is connected to the 
Camcorder in Card Recording Mode.

CANNOT OPERATE:

You are attempting to turn the Camcorder 
off while connecting the USB Cable to the 
Camcorder.
You are attempting to record pictures on a 
Card while connecting the USB Cable to the 
Camcorder in Tape Recording/Playback 
Mode.

UNABLE TO WRITE
(MULTI RECORDING):

The [PHOTO SHOT] Button is pressed 
when you are recording pictures on a Tape 
while setting the Digital Effect [MULTI] of 
[EFFECT1].

UNABLE TO WRITE:

The [PHOTO SHOT] Button is pressed 
when you are recording on a Tape and 
while inserting a Title.

NO TITLE:

Titles are not recorded.

UNABLE TO INSERT TITLE:

You are attempting to perform Title In 
Function when RapidFire Consecutive 
Photoshot function is set.

UNABLE TO WRITE
(WIDE MODE):

You are attempting to record S1 signal 
pictures (with aspect ratio 16:9) by pressing 
the [PHOTO SHOT] Button.

FILE LOCKED:

You are attempting to erase protected files.

CARD LOCKED:

The write protection switch on the SD 
Memory Card is set to [LOCK].

DISCONNECT USB CABLE:

You are attempting to turn the Mode Dial in 
PC Mode while connecting the USB Cable 
to the Camcorder.

PC DOES NOT SUPPORT USB2.0:

In the MotionDV STUDIO Mode, your 
personal computer does not support USB 
2.0 Hi-Speed.

CAN NOT USE USB:

You are attempting to connect the USB 
Cable while the DV Cable is connected.

PV-GS400Eng.book  73 ページ  ２００４年６月４日　金曜日　午後３時１７分