Panasonic PV-GS65 User Guide
Record mode
32
LSQT0860
Self-timer recording
You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
timer.
≥Set to Card Recording Mode.
1
Set [BASIC] >> [SELF TIMER] >> [YES].
2
Press the [PHOTO SHOT] button.
≥After the recording lamp and the [
]
indication flashes for approx. 10 seconds,
recording will start. After recording, the
self-timer will be canceled.
recording will start. After recording, the
self-timer will be canceled.
ª
To stop the timer midway through
Press the [MENU] button.
≥By operating the [OFF/ON] switch or mode dial,
the self-timer standby mode is canceled.
≥If the RapidFire Consecutive Photoshot
recording is set, the maximum recordable
pictures are recorded.
pictures are recorded.
Recording images for wide-screen
TVs
TVs
This allows you to record images compatible with
wide-screen TVs.
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
wide-screen TVs.
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
1
Set [ADVANCE] >>[CINEMA] >> [ON].
ª
To cancel the Cinema function
Set [ADVANCE] >>[CINEMA] >> [OFF].
≥Images played back vary depending on the TV
connected. Please refer to the operating
instructions for your TV.
instructions for your TV.
≥This function does not widen the recording
range.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥When a cinema picture is imported onto a
personal computer, the imported picture may
not be displayed correctly, depending on the
software used.
not be displayed correctly, depending on the
software used.
Image stabilizer function
Reduces the jitter caused by hand movement
when recording.
≥Set to Tape Recording Mode.
when recording.
≥Set to Tape Recording Mode.
1
Set [ADVANCE] >> [EIS] >> [ON].
ª
To cancel the image stabilizer function
Set [ADVANCE] >> [EIS] >> [OFF].
≥When a tripod is used, we recommend that you
turn the image stabilizer function off.
≥Under fluorescent lighting, image brightness
may change or colors may not look natural.
≥When the MagicPix function is used, the image
stabilizer function does not work. If so, the [EIS]
indication flashes.
indication flashes.
≥In the following cases, the image stabilizer
function may not work effectively.
≥When the digital zoom is used
≥When recording is done in an extremely dark
≥When recording is done in an extremely dark
place
≥When the Camcorder is shaken greatly
≥When you record a moving subject while
≥When you record a moving subject while
tracking it
PHOTO
SHOT
CINEMA
EIS
LSQT0860ENG.book 32 ページ ２００４年１２月２２日 水曜日 午後２時３８分