Panasonic PV-GS9 User Manual

Page of 60
Record mode
26
LSQT1284
Recording a still picture on a tape 
(Photoshot)
Set to Tape Recording Mode.
1
Press the Photoshot button [
] in the 
recording pause mode.
≥The Camcorder records a still picture for 
about 7 seconds and then switches back to 
the recording pause mode.
≥If you set [ADVANCED] >> [SHTR EFFECT] >> 
[ON], you can add image and a sound like 
releasing the shutter.
≥Photoshot recording results in slightly inferior 
image quality.
ª
Continuous photoshot
If you set [ADVANCED] >> [SHTR EFFECT] >> 
[ON] and keep the [
] button pressed, the 
Camcorder will continuously record still pictures 
in approx. 0.7 seconds intervals until the button is 
released.
≥The screen blinks and, at the same time, a 
shutter clicking sound is recorded.
Zoom in/out function
You can zoom in up to 42
k optically.
Set to Tape Recording Mode.
1
Wide-angle recording (zoom out):
Push the [W/T] lever towards [W].
Close-up recording (zoom in):
Push the [W/T] lever towards [T].
≥When zooming in and taking a picture while 
holding the Camcorder by hand, we recommend 
using the optical image stabilizer function. 
-30-
≥When you are zooming in on a faraway subject, 
a sharper focus is achieved if the recording 
subject is 1.3 m (4.3 feet)  or further from the 
Camcorder.
≥When the zoom speed is high, the subject may 
not be focused easily.
≥When the zoom magnification is 1k, the 
Camcorder can focus on a subject approx. 2 cm 
(0.8 inches) away from the lens.
≥Be aware that a mechanical sound may be 
recorded when the [W/T] lever is released while 
zooming. Gently move the zoom lever back to 
it’s original position before releasing it.
1
W
T
5
W
T
42
42
W
T
PV-GS90P_LSQT1284_Eng.book  26 ページ  2007年11月28日 水曜日 午前9時20分