Panasonic vdr-m53 User Guide

123

Press the A button in recording pause mode.

The DVD Video Camera will enter the playback 
mode, and the scene you recorded last will be 
played back.
When playback is finished, the DVD Video 
Camera will enter pause mode at the last image 
on disc.
If playback pause mode continues for as long as 
5 minutes, the DVD Video Camera will 
automatically return to recording pause mode.

Press the 

g button.

Playback will stop, and recording pause mode 
will be restored.

During playback of movie, playback sound will be heard 
from the speaker. Adjust the sound volume using the 
volume control buttons (

(, )).

You can play back the audio recorded in Dolby Digital 
(2ch).

To temporarily stop playback, press the A button. 
Press the A button again to restart playback.

Even if you stop playback midway and immediately start 
recording again, the new image will be recorded after the 
last scene on disc or card (the previous images will not be 
overwritten).

Image data edited on PC or certain types of image data 
may not be displayed on this DVD Video Camera.

Image data recorded on another camcorder may not be 
playable on this DVD Video Camera.

Depending on the amount of data to be played back, it 
may take some time for the playback image to appear.

Do not operate the power switch or remove the card while 
the ACCESS/PC or CARD ACCESS indicator is lit or 
blinking: Doing so may damage the card or the data on 
card.

Before You Begin

•  Insert a disc or card recorded on this DVD Video Camera (P. 46, 49).
• Turn the DVD Video Camera on (P. 50).

RIGHT

LEFT

UP

DOWN

VDR-M95M75M55M53PP.book  Page 59  Tuesday, March 29, 2005  2:19 PM