Panasonic SDR-S100 User Guide
56
VQT0T50
You can record still pictures on an SD card using the timer.
¬Rotate the mode dial to select
.
1
Press the button in the center to
display the icon shown in the figure.
display the icon shown in the figure.
2
Press the cursor button left to select
the [
the [
Ø] self-timer icon.
The
[
Ø
10
] icon
flashes orange, then lights
white.
≥ Each time the left cursor button is pressed, the
≥ Each time the left cursor button is pressed, the
indication changes by one setting in the
following order: [
following order: [
Ø
10
]
>[
Ø
2
]
>setting
cancelled.
–
Ø
10
: Starts recording after 10 seconds
–
Ø
2
: Starts recording after 2 seconds
3
Press the record button.
After the indication lamp and the
[
Ø
10
] or
[
Ø
2
]
indication flash for the time which has
been set, recording will start. After recording,
the self-timer is cancelled.
the self-timer is cancelled.
1 Indication lamp
≥ When the record button is pressed halfway
≥ When the record button is pressed halfway
and then all the way, the subject will be
brought into focus when the record button was
pressed halfway.
brought into focus when the record button was
pressed halfway.
≥ When the record button is pressed all the way
at once, the subject will be focused just before
the recording.
the recording.
To stop the timer midway through
Press the [MENU] button. (The self-timer setting is cancelled.)
Self-timer recording
This is for recording using the timer.
1
≥ By operating the [ON/OFF] switch or
mode dial, the self-timer standby mode is
canceled.
canceled.
≥ Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
longer than set to start.
≥ Setting the self-timer to [
Ø
2
] is a good
way to prevent image shake when the
record button is pressed while using a
tripod etc.
record button is pressed while using a
tripod etc.
VQT0T50_PP_ENG.book 56 ページ ２００５年８月３１日 水曜日 午後２時２５分