Panasonic SDR-S15 User Manual

Page of 121
18
LSQT1426
19
LSQT1426
The following SD and SDHC Memory Cards can be used.
Type of card
Capacity
SD Memory Card
(SD speed Class 2 or higher recommended)
256 MB
512 MB
1 GB
2 GB
SDHC Memory Card
(Use cards bearing the 
 logo.)
4 GB
6 GB
8 GB
12 GB
16 GB
32 GB
8 MB and 16 MB SD Memory Cards are for still picture recording only.
With 32 MB, 64 MB and 128 MB SD Memory Cards, still pictures can be 
recorded, but motion picture recording may stop during use. 
Multimedia cards cannot be used.

  Recommended Panasonic SD/SDHC Memory Cards 
(as of January 2009)
The following Panasonic SD/SDHC Memory Cards and SD speed Class 2 or 
higher Memory Cards are recommended for this unit. With other types of SD 
cards, motion picture recording may stop during use.
SD Memory Card
SD/SDHC Memory Card
High Speed
Class 2
Class 4
Class 6
256 MB
RP-SDH256
RP-SDR256
512 MB
RP-SDK512
RP-SDR512
1 GB
RP-SDH01G
RP-SDR01G
RP-SDV01G
2 GB
RP-SDK02G
RP-SDR02G
RP-SDM02G
RP-SDV02G
4 GB
RP-SDR04G
RP-SDM04G
RP-SDV04G
6 GB
RP-SDM06G
8 GB
RP-SDV08G
12 GB
RP-SDM12G
16 GB
RP-SDV16G
32 GB
RP-SDV32G
SDHC Memory Cards can be used only with SDHC devices.
Be careful when sharing cards between devices.
Be sure to format SD cards with this unit only.
If cards are formatted on a PC or other device, recording may take time and 
the card may become unusable with the unit. 
Before using an SD card from another device, copy the data onto a PC or 
other storage device and then format the card with this unit.
Keep the Memory Card out of reach of children to prevent swallowing.
This unit supports SD Memory Cards formatted to FAT12 or FAT16 file 
systems and SDHC Memory Cards formatted to a FAT32 file system. 
SD speed Class 2    
Class 2 speed standard for SD cards. This and higher types of SD cards 
operate stably in devices for which Class 2 or higher SD cards are 
recommended, such as this unit.

Precautions in handling
Do not touch the terminals on the back of the card. Also, prevent dirt, water 
and foreign matter from adhering to terminals.
Do not leave cards in the following areas:
· Where exposed to direct sunlight
· Humid or dusty places
· Near heaters or other sources of heat
·  Where subjected to sharp temperature changes (condensation can occur)
· Where exposed to static electricity or electromagnetic waves
After use, return cards to their pouch or case.
SD card data may be corrupted or lost due to electrical noise, static 
electricity, damage to the unit or card, etc. Save important data on a PC 
using the supplied USB cable, VideoCam Suite, etc. (P.76)

Applicable SD cards 
(sold separately)
 Write-protecting cards
When the write-protect switch on the SD card is set to the LOCK position, 
data cannot be written onto or deleted from the card, and the card cannot be 
formatted.
Write-protect switch