Panasonic SDR-S15 User Manual

68

LSQT1426

69

LSQT1426

  Connect the unit and AC adaptor (P.20), and set the mode dial to a setting 

other than [OFF].

 Connect the unit to the printer using the USB cable (supplied).

Insert the plugs as far as they will go.

Select [PictBridge].

Select the still pictures to print.

Number of 
copies (Max. 9)

Set the number of copies.

To not print the picture, set “0”.
Repeat steps 

 and 

 to select up to 8 still 

pictures for printing. 

•
•

Do not use any other USB connecting cables except the supplied one. 
(Operation is not guaranteed with any other USB cables.)
Connect the unit directly to the printer without going through a USB hub.
For paper size and print quality, etc., check printer settings.
Avoid the following operations during printing. Otherwise, pictures will not print 
correctly:

Disconnecting the USB cable
Opening the card/battery door
Rotating the mode dial
Shutting off power

●

●
●
●

•
•
•
•

Display the PictBridge menu.
Make print settings.

DATE PRINT

OFF/ON

PAPER SIZE

STANDARD:  Prioritize printer setting.
4×5 INCH:    L size
5×7 INCH:    2L size
4×6 INCH:    Postcard size
A4:            A4 size

PAGE LAYOUT

STANDARD:  Prioritize printer setting.
[

]:          No frame print

[

]:          Frame print

Settings not supported by the printer cannot be selected.

[PRINT]→[YES]
When printing is complete, disconnect the USB 
cable (supplied) and exit [PictBridge].

 

  

A confirmation message appears.
[YES]: Cancels print settings and returns to step 

.

[NO]:  Saves print settings made in steps 

 - 

 and returns to step 

.

●

Still pictures recorded with other devices may not be printed.
DPOF settings (P.65) cannot be used while this unit is directly connected to a 
PictBridge printer.

●
●

3

Still pictures recorded with this unit can be printed by connecting the unit 
directly to a printer that supports PictBridge.