Panasonic SDR-S150 Operating Guide
19
VQT0X39
How to turn on the power
Set the power switch to [ON].
The status indicator
1 lights red and, in motion
picture recording mode or still picture recording
mode (P21), the lens cover opens.
mode (P21), the lens cover opens.
How to turn off the power
Set the power switch to [OFF].
The status indicator goes out and the lens cover
closes.
≥ If the LCD monitor is closed in motion picture
closes.
≥ If the LCD monitor is closed in motion picture
recording mode or still picture recording mode
(P21), the power turns off.
(P21), the power turns off.
Quick start
If quick start is set and then the LCD monitor is closed while the unit’s power is still on,
the unit will be ready for recording about 1.5 seconds after the LCD monitor is next
opened.
Use the quick start function when stopping recording for a few moments.
the unit will be ready for recording about 1.5 seconds after the LCD monitor is next
opened.
Use the quick start function when stopping recording for a few moments.
≥ The quick start function can be set in the following cases.
– In motion picture recording mode, when the SD card is inside this unit
– In still picture recording mode, when the SD card is inside this unit
– In still picture recording mode, when the SD card is inside this unit
≥ The recordable time will become shorter
when you use this unit with the LCD
monitor lit up by pressing the
[POWER LCD] button.
monitor lit up by pressing the
[POWER LCD] button.
≥ The batteries heat up after use or
charging. The unit and the SD card also
heat up during use. This is not a
malfunction.
heat up during use. This is not a
malfunction.
≥ Along with the reduction of the battery
capacity, the display will change:
#
#
#
#
. If the battery discharges,
then
(
) will flash.
Turning the unit on/off
1
ON
OFF
ON
OFF
When the unit is not being used, set the power switch to [OFF].
VQT0X39ENG.book 19 ページ ２００６年６月１４日 水曜日 午前１０時５１分