Panasonic SDR-S150 Operating Guide
68
VQT0X39
Please be aware that if an SD card is formatted, then all the data recorded on the
card will be erased. Store important data on a PC, etc. We recommend using
MotionSD STUDIO etc. to acquire data recorded on this unit. (P76)
card will be erased. Store important data on a PC, etc. We recommend using
MotionSD STUDIO etc. to acquire data recorded on this unit. (P76)
¬ Rotate the mode dial to select
,
,
or
.
1
Press the menu button, then use the
cursor button to select [
cursor button to select [
SETUP]
#
[
FORMAT CARD]
#[YES]. (P27)
2
When the confirmation message
appears, use the cursor button to
select [YES], then press the button in
the center.
appears, use the cursor button to
select [YES], then press the button in
the center.
≥ To cancel formatting, select [NO].
Formatting an SD card
This is for initializing (formatting) cards.
MENU
SETUP
ENTER
EXIT
DISPLAY
FORMAT CARD
DATE/TIME
POWER SAVE
SETUP
YES
NO
1/2
DATE FORMAT
SETUP
ENTER
FORMAT CARD
ALL DATA WILL BE
DELETED.
FORMAT THE CARD NOW?
DELETED.
FORMAT THE CARD NOW?
YES
NO
MENU
EXIT
≥ Use this unit to format SD cards. If an SD card is formatted on other equipment (such as
a PC), the time spent for recording may become longer and you may not be able to use
the SD card.
the SD card.
≥ During formatting, do not turn this unit off.
≥ When you format the SD card, use a battery with sufficient battery power or the AC
≥ When you format the SD card, use a battery with sufficient battery power or the AC
adaptor.
≥ Depending on the type of SD card being used, it may take time to format.
≥ Do not remove the SD card while formatting.
≥ If the write protection switch on an SD card is set to [LOCK], it cannot be formatted.
≥ Do not remove the SD card while formatting.
≥ If the write protection switch on an SD card is set to [LOCK], it cannot be formatted.
(P16)
VQT0X39ENG.book 68 ページ ２００６年６月１４日 水曜日 午前１０時５１分