Panasonic SDR-S150 Operating Guide

Page of 124
90
VQT0X39
If the driver does not work properly, follow the steps below to verify if it has been 
recognized properly. Select the unit’s mode, connect the unit to the PC via the USB 
cable, then verify the driver. (P83)
≥ With some PCs including those made by NEC, the Device Manager may not be 
displayed if a mode that places restrictions on the functions has been established. 
Consult the manufacturer or follow the steps in your PC’s operating instructions to 
establish a mode in which all the functions can be used, then proceed with 
operation.
Select [start]
>([Settings]>
[Control Panel]
>([Performance and 
Maintenance]
>) [System].
Display [Device Manager], and check 
whether the driver has been installed 
properly.
≥ Click the [Hardware] tab, then click [Device 
Manager].
∫ If the driver has been recognized properly
(When the unit is in the motion picture recording or still picture recording mode)
Windows XP:
[USB composite device] is displayed at [USB controller] 
and [USB video device] at [Imaging device].
≥ If two, three or more SD video cameras are 
connected, [USB video device #X (X: number)] may 
appear.
Windows 2000:
[Panasonic SD Video Camera Web Camera Device] 
appears at [Imaging device].
(When the unit is in PC Connection mode)
[USB Mass Storage Device] appears at [USB (Universal Serial Bus) controller].
Verifying the driver
VQT0X39ENG.book  90 ページ  2006年6月14日 水曜日 午前10時51分