Panasonic SDR-S26 User Manual

Page of 116
39
LSQT1488
The zoom microphone is linked to the zooming 
operation so that far-away sounds with a tele-
shot and close-up sounds with a wide-angle shot 
are recorded more clearly.
¬Rotate the mode dial to select 
.
Select the menu. (25)
¬Rotate the mode dial to select 
 or 
.
Rotate the LCD monitor towards the 
lens side.
≥ The image is horizontally flipped as if you see 
a mirror image. (However the image recorded 
is the same as a normal recording.)
≥ When the LCD monitor is rotated towards the 
lens side, the icon will not be displayed even if 
you press the joystick.
≥ Only some indications will appear on the 
screen. When [°] appears, return the 
direction of the LCD monitor to normal position 
and check the warning/alarm indication. (l 90)
This unit will resume recording/pause mode 
about 0.8 seconds after the LCD monitor is 
reopened.
≥ When in Quick start standby mode about 
60% of the power used in recording pause 
mode is being consumed, so the recording 
time will be reduced.
¬Rotate the mode dial to select 
 or 
.
1
Select the menu. (25)
2
Close the LCD monitor while the 
mode dial is set to 
 or 
.
The status indicator A flashes green and the unit 
goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator A lights red and the unit is 
put into recording pause approx. 0.8 seconds 
after it is turned on.
To cancel Quick start
Select [SETUP] 
# [QUICK START] # [OFF]
≥ The default setting is on.
≥ Quick start standby mode is canceled if
jabout 5 minutes elapsed
jthe mode dial is switched
jthe battery is removed or the AC adaptor is 
disconnected
To use the zoom microphone 
function
[ADVANCED] 
# [ZOOM MIC] # [ON]
Recording yourself
Quick start
[SETUP] 
# [QUICK START] # [ON]
SDR-S26P_PC-LSQT1488_mst.book  39 ページ  2009年2月6日 金曜日 午後4時0分