Panasonic SDR-T55 User Guide
20
VQT2N91
Caution:
Check that the access lamp has gone off.
Check that the access lamp has gone off.
1
Open the LCD monitor.
2
Open the SD card cover and insert (remove) the SD card into (from)
the card slot.
the card slot.
≥ Face the label side B in the direction shown in the illustration and press it straight in as far
as it will go.
≥ Press the centre of the SD card and then pull it straight out.
3
Securely close the SD card cover.
≥ Do not touch the terminals on the back of the SD card.
≥ See page 110 for details on handling the SD card.
≥ See page 110 for details on handling the SD card.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l 74) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
for the first time on this unit, format the SD card. (l 74) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD card or built-in memory, the access lamp lights up.