Panasonic pv-dr2714 User Guide

TV Operation

MTS Broadcast / TV Stereo System

The following are possible audio broadcast types and on-screen

displays. The signal being received is indicated with a “ ” mark

while the selected audio mode is indicated with an arrow. To

change the audio mode for these broadcasts, see the “Audio Mode

for TV Viewing” section.

Press DISPLAY to display the broadcast signal

being received.

MTS Stereo broadcast:

Multi-channel Television Sound Stereo broadcast. Select

STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select

MONO audio mode for possible improvement.

SAP broadcast:

Secondary Audio Program (sub language).
Select SAP audio mode for the sub language.

Press AUDIO to select the desired audio mode as

described above. (Arrow shows selection.)

• Each press of AUDIO will change the audio mode as shown below.
• “SAP” is selected with first press of AUDIO.

MONO broadcast:

Normal monaural sound broadcast.

< Example >

Equipped with

-TV Noise Reduction for true MTS

reproduction.

-TV Noise Reduction is required for good

stereo separation and audio fidelity.

is a registered

trademark, and is licensed by

Technology Licensing.

MTS Stereo and SAP broadcast:

Multi-channel Television Sound Stereo (main language) and

Secondary Audio Program (sub language) broadcasts are being

received simultaneously. Select the STEREO or SAP audio

mode.

11:00AM CH 08
STOP 0:30
STOP
STEREO VCR DVD
SAP EP XP
MONO

STEREO
SAP
MONO

11:00AM CH 08
STOP 0:30
STOP
STEREO VCR DVD
SAP EP XP
MONO

DISPLAY

AUDIO

Receivable Broadcast Types

Audio Mode for TV Viewing

STEREO
SAP
MONO