Panasonic pv-dr2714 User Guide

•  This may not work with some discs.
•  This works only when stopped (screen saver is displayed on the 

television) with some discs.

•  Output is in PCM when using a digital connection. (p. 14)
•  This is cancelled when you perform skip, pause, or when play reaches a 

point where a program recorded in sound other than Dolby Digital starts.

•  This does not work if the setting is “Off” in “Search Audio & PLAY×1.3”. 

(p. 68)

•  This does not work when recording is in XP or FR mode during 

simultaneous recording and play. (p. 48).

„

Press PLAY/×1.3.

The play speed can be increased without distorting the audio.

• On the unit, hold down ŹŹǿ or ǿŻŻ.
• When slow motion play is continued for about 5 minutes it pauses 

automatically.

•  The speed increases up to 5 steps.
•  Press PLAY/×1.3 to restart play.

„

Press PLAY/×1.3.

„

Press PLAY/×1.3.

•  Each press shows the next frame.
•  Press PLAY/×1.3 to restart play.
•  Whether pictures are advanced by “Field” or “Frame” is selected 

automatically (see page 68.)

The unit displays the television image as a picture-in-picture.

• You will hear the playback audio.
• Press TIME SLIP again to cancel.

Play images

Current receiving images

• You can change the channel being 

received by pressing CH Ÿź.

• You cannot change the channel 

being received while recording.

Starting play from a selected title, chapter or track.

„

Press TIME SLIP.

• The time indicator will go off after about 5 seconds, but will turn on 

again when you set the indicator.

• Press Ÿź to alter in one-minute units. Press and hold Ÿź to alter 

in 10-minute units.

• Play skips the specified time.

e.g., 5: 

[0]  ĺ [5]

 15: 

[1] 

ĺ [5]

e.g., 5: 

[0]  ĺ [0]  ĺ [5]

 15: 

[0] 

ĺ [1]  ĺ [5]

 115: 

[1] 

ĺ [1]  ĺ [5]

(Only with Dolby Digital)