Panasonic pt-47wxd63 User Guide

11 z

Channel and Program tuning in digital television is different from
current conventional television. In DTV, up to six (6) multiple
programs can exist within a single 6MHZ channel. These
channels behave as sub-channels within a single channel. When
tuning to a digital channel, the HDTV Projection Television will
also tune to a program. The HDTV Projection Television will
indicate the channel and program using the on-screen Channel
Banner display.
Note:

You can tune the digital and analog channels in the following
ways:
ˆ

Direct tuning (0 - 9 keys) - using the numeric keys on the
Remote control to directly input the Channel number. If

necessary, use the 

 button to enter the program number of

the digital channel.

ˆ

Channel Up/Down Tuning (CH   or CH 

buttons) - Tunes

to the next or previous available channel or program. The
Channel Up/Down tuning depends upon the surfing mode
(see pg. 21) you have set in the Channel menu.

ˆ

Rapid Tuning (R-TUNE) - Switches between the last two
channels or programs.

Follow the procedure below to directly enter the channel number
using the Remote Control numeric keys.

•

Press the numeric keys on the Remote Control to enter
the Channel number. Press OK button.

•

If tuning a digital channel and your channel contains

more than one program, press the 

 button and enter

the program # (1, 2, 3 etc.) using the numeric keys.
Press OK button. The following is an example of tuning
to channel 15-1.

The HDTV Projection Television will tune to channel 15-1.

The minimized Channel Banner will display the antenna input,
channel number, and the station identification (if available).

Press the RECALL button to display the maximized channel
banner. While the channel banner is displayed, you can add the
channel to Favorite channel list or delete the channel from the
Favorite channel list.   

This feature lets you add channels to Favorite channel list or
delete channels from Favorite channel list.

•

Tune the desired the channel to be added or deleted.

•

Press the RECALL button to display the Channel
Banner.

•

Press the OK button to execute your choice.

If a DCM (Digital Cable Module) is installed, the cable MSO
(multiple system owner/operator) may provide an Emergency
Alert System message. These messages are intended to alert the
general public of important local or national emergency situations.
In the event of receipt of one of these messages, the HDTV
Projection Television shall immediately tune to the channel as
directed by the EAS message. If the channel has blocked using
the parental control, the parental blocking has priority over the
forced tune.

1

Press  1

1

2

Press  5

15

3

Press 

15-

4

Press  1

15-1

5

Press OK

15-1

Clock

Time remaining
in Sleep Timer

Audio

Track of 

digital channel

Antenna designation,
Channel and program #
and Station identifier

Rating
indication

Program Aspect

Picture mode 
setting

Closed Caption and
SAP indication

Add FAV or 
Del FAV button

PIP/SPLIT CH# or 
Input information

P9 0474 E  080403R.fm  Page 11  Wednesday, August 13, 2003  8:18 AM