Panasonic pt-50lcx7 User Guide

Basic Operation

Selecting Input Mode

Procedure

1. Press TV/VIDEO to display the Input select

menu.

2. Press corresponding NUMBER keys to select

the input of your choice. Or, press

▲▼ to

select the input of your choice, then press
OK.

If, during selection, no action is taken for several seconds,
the Input selection menu is exited and the current input is
automatically selected.

•

Component 1

Component 2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
Video 3
PC

1
2
3
4
5
6
7
8
9
0

Input select

Component 1

Component 2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
Video 3
PC

1
2
3
4
5
6
7
8
9
0

Input select

Note

If SKIP is set as the Input Label setting, the mode will not be
changed. (p. 50)

Rapid Tuning

Switches between the current and last channel or input
modes.

Procedure

1. Press R-TUNE to switch to previously viewed

channel or input modes.

Note

When Photo viewer (p. 46) is used, Rapid Tuning is not
available.

Using the CH/ VOL Button

Select desired channel:

Press CH

< >

or NUMBER keys.

Adjust to desired volume level:

Press VOL+ or VOL-.

Notes

The channel number and volume level are stored even after
the unit is turned off.
Power consumption can be reduced if the volume level is
lowered.

•

■

•

Component 1

Signal of source connected to COMPONENT
VIDEO INPUT 1 is displayed.

Component 2

Signal of source connected to COMPONENT
VIDEO INPUT 2 is displayed.

HDMI 1

Signal of source connected to HDMI IN 1 is
displayed.

HDMI 2

Signal of source connected to HDMI IN 2 is
displayed.

HDMI 3

Signal of source connected to HDMI IN 3 is
displayed.

Video 1

Signal of source connected to VIDEO INPUT
1 is displayed.
Signal of source connected to S VIDEO
INPUT is displayed.

Video 2

Signal of source connected to VIDEO INPUT
2 is displayed.

Video 3

Signal of source connected to VIDEO INPUT
3 is displayed.

Signal of source connected to PC IN is
displayed.