Panasonic PT 56DLX76 User Guide

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo

Channel and Program tuning in digital television differs 
from conventional television. With  DTV, many programs 
can exist within a single 6 MHz channel. These channels 
behave as sub-channels within a single channel. When 
tuning to a digital channel, the unit will also tune to a 
program and will indicate the channel and program in the 
on-screen Channel Banner display.
In order to select channels properly, Auto program must 
be performed. (p. 33)
Follow the procedure below to directly enter the channel 
number using the NUMBER keys on the Remote 
Control.

Press the 

NUMBER keys on 

the Remote Control to enter the 
Channel number. Press OK.
The following is an example of 
tuning to channel 15.

If tuning a digital channel and your 
channel contains more than one 
program, press PROG and enter 
the program (1, 2, 3 etc.) using the 
NUMBER keys. Press OK. The 
following is an example of tuning to 
channel 15-1.

Direct Tuning Example

1

Press 1

1

2

Press 5

15

3

Press -

15-

4

Press 1

15-1

5

Press OK

15-1

Direct Tuning Example

1

Press 1

1

2

Press 5

15

3

Press OK

15

Press CH 

< >

 to minimize the 

displayed channel banner. It 
will display the channel number, 
and the station identification (if 
available).

Press RECALL to maximize the 
displayed channel banner.

Channel Number

Station Identifier

Closed Caption

Channel, Program and Station identifier

Press the Channel 

< >

 or  RECALL button, except when 

the MENU screen is dis played, to display current unit 
status information.

Program title

SAP

Rating 
Level

Signal resolution

Picture mode

Aspect ratio

Sleep Timer 
remaining time

• The channel number and volume level are stored even after 

the unit is turned off.

• Power consumption can be reduced if the volume level is 

lowered.

Press CH 

< >

 or NUMBER keys.

Press VOL + or VOL -.

• If, during channel selection, no action is taken for several 

seconds, the Channel Banner is exited and the currently input 
channel is automatically selected.

• If, during channel selection, no action is taken for several 

seconds, the Channel Banner is exited and the currently input 
channel is automatically selected.

• The Station identifier is not displayed when you use Split 

Screen mode.

Clock

Ending time