Panasonic TC-L37U3 User Guide

31

 How to Use Menu Functions

 

●

“Reset to default” will be grayed out if no changes are made in the following menus: 
“Picture”, “PC adjustments”, “Audio” and “Closed caption”.

Adjust the image or picture quality

Resets all picture adjustments to factory default settings except for “Advanced picture”.

Provides enhanced picture contrast and sharpness for viewing in a well-lit room.

Recommended for normal viewing conditions with subdued room lighting.

For watching movies in a darkened room. It provides a soft, film-like picture.

For playing video games.

Customizes each item according to your taste.
Photo is displayed in JPEG menu.

Adjusts the luminance of the back light.

Adjusts the color, brightness, etc. for each picture mode to suit your taste
• Display range 

Contrast/Brightness/Color/Sharpness 

: 0 - 100

 

 

Tint 

: -50 - +50

Selects a choice of Cool (blue), Normal, or Warm (red) color. 

Controls dark areas without affecting the black level or brightness in the overall picture.

Automatically adjusts the screen brightness according to the ambient lighting condition. 

Reduces noise, commonly called snow. Leave it off when receiving a strong signal.

•  Some menus are grayed out depending on the input signal or condition.

(e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.)

Changes the format (aspect ratio). 
Lets you choose the aspect depending on the format of 
received signal. (p. 36)

Selects between 95 % (Size 1) or 100 % (Size 2) for the 
scanning area with High-definition signal. 
Select “Size 1” if noise is generated on the edges of the screen.

• 

Size 1: Selected item for “HD size”. Scanning 95 %

• 

Size 2: Selected item for “HD size”. Scanning 100 %

Adjusts the horizontal display range to reduce noise of both side 
edges of an image.
Size 2: Adjusts the image size according to the aspect mode to 
reduce noise. (p. 36)

Adjusts vertical alignment and size when aspect setting is “ZOOM”.

Resets PC adjustments.

The H and V sync signals are input from the HD/VD connector. (p. 39)

Uses a synchronized signal on the Video G signal, which is 
input from the G connector. (p. 39)

Alleviates the problem if a picture appears to be vertically-striped, flickers partially or 
is blurred.

Adjusts the horizontal position.

Adjusts the vertical position.

Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase 
so that a clear picture appears.

 

●

It may not be possible to display a clear picture due to poor input signals.

Switches to wide display.

 

●

VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels), WXGA 
(1,280×768 pixels)

 

●

Options change depending on signals

Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical: 

48 - 120 Hz

tc_L32_37_42u3_u30_eng_0600.indb   31

tc_L32_37_42u3_u30_eng_0600.indb   31

2010/12/21   13:29:26

2010/12/21   13:29:26