Panasonic TC-L37U3 User Guide

34

Other function settings

Sets the mode to select the channel with the Channel up/down button. 
Favorite: Only channels registered as FAVORITE. (p. 16)

Selects the screen menu language.

Adjusts the clock. (p. 14)

ANT/Cable setup See p. 28-29 for more detail.

Input labels
(Display labels 
of connected 
devices)

Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier identification during the 
input selection. (Input select (p. 19))
Terminals: HDMI 1-3/Comp./Video/PC

Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/VCR/
CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/
OTHER

• You can also enter the label name directly. (Entering characters (p. 17))

VIERA Link settings See p. 24-25 for more detail. 

Reduces screen brightness to lower power consumption. Eye-friendly for 
viewing in a dark room. 

To conserve energy, the TV automatically turns off when NO SIGNAL and NO 
OPERATION continue for more than 10 minutes.
•  Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.
•  “No signal for 10 minutes was activated” will be displayed for about 10 seconds 

when the TV is turned on for the first time after the power was turned off by “No 
signal for 10 minutes”.

•  The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining 

minutes prior to the shut-off.

To conserve energy, the TV automatically turns off when no operation of remote and 
side panel key continues for more than 3 hours.
•  Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while 

“PC inputs” is selected.

•  “No activity for 3 hours was activated” will be displayed for about 10 seconds when 

the TV is turned on for the first time after the power was turned off by “No activity 
for 3 hours”.

•  The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining 

minutes prior to the shut-off.

Turns TV On automatically when the cable box or connected device is turned On.
TV AC cord must be plugged into this device. TV turns on every time the power is restored.

Sets the playback type to play back SD cards automatically. 
Set later: “Image viewer settings” menu will be displayed repeatedly.
“Viewing photos with VIERA IMAGE VIEWER” (p. 20)

Restarts the first time setup from “Language” setting. (p. 12)

Displays TV version and software license.

Performing Reset will clear all settings made with Setup, such as channel 
settings.
• Password setting/entering (p. 17)

tc_L32_37_42u3_u30_eng_0600.indb   34

tc_L32_37_42u3_u30_eng_0600.indb   34

2010/12/21   13:29:28

2010/12/21   13:29:28