Panasonic th-103pf12 User Guide

You can set the remote control ID when you want to use this remote control on one of several different displays.

Switch 

 to 

 on the right side.

Press the 

 button on the remote control.

Press one of 

 - 

, 

 for the tens digit setting.

Press one of 

 - 

, 

 for the units digit setting. 

Notes:
•  The numbers in 2, 3 and 4 should be set up quickly.
•  Adjustable ID number range is 0 - 99.
•  If a number button is pressed more than two times, the fi rst two numbers become the ID number 

for the remote control.

Press 

 button on remote control. (This has the same effect as pressing the 

, 

, 

 buttons at the same time.)

Notes:
•  Set the Remote ID “On” to operate the ID remote control.
  If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. 
  (see page 56)
•  The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not 

the same as the ID select number (see page 56).

The operation is the same as normal remote control except for the 

 button.

Select “OFF” or “ON”.

The brightness depends on each 

display’s setting.

Equalize the brightness of all the 

displays.

OFF

ON

Note:
If you set AI-SYNCRONIZATION to ON, the following menus will be unavailable and these 
settings will be fi xed to the initial values.
PICTURE menu: COLOR, TINT, INPUT LEVEL (ADVANCED SETTINGS)

Press to exit from adjust mode.