Panasonic th-47lf30 User Guide
3D Y/C FILTER
COLOR SYSTEM
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
OFF
[ VIDEO ]
3 : 2 PULLDOWN
OFF
XGA MODE
1024
×768
40
3:2 PULLDOWN
COLOR SYSTEM
Select SIGNAL from the “SET UP” menu during Video input signal mode.
(“SIGNAL [VIDEO]” menu is displayed.)
(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” .
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy
input signals the image may in rare cases become unstable. Should
this occur, set the system to match the format of the input signal.
With the system set on Auto, under conditions of low level or noisy
input signals the image may in rare cases become unstable. Should
this occur, set the system to match the format of the input signal.
Press to select “3:2 PULLDOWN”.
Press to set ON/OFF.
3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during Video input signal.
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during Component input signal.
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during Video input signal.
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during Component input signal.
XGA MODE
This menu is displayed when the input signal is analog (Component/PC).
This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates
(1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @ 60Hz
XGA input signal irrespective of this setting.
This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates
(1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @ 60Hz
XGA input signal irrespective of this setting.
Press to select “XGA MODE”.
Press to select “1024×768”, “1366×768”.
Note:
After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as
necessary. (see page 23)
After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as
necessary. (see page 23)
COLOR SYSTEM: Set the color system to match the input signal. When “AUTO” is set, COLOR SYSTEM will be automatically
selected from NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N.
To display PAL60 signal, select “AUTO”.
To display PAL60 signal, select “AUTO”.
AUTO
SECAM
NTSC
PAL M
PAL N
NTSC 4.43
PAL