Panasonic th-65pb1 User Guide

INPUT

MENU

ENTER/

+

/

VOL

-/

MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen 
will switch.

Power Indicator
The Power Indicator will light.

• Power-OFF .... Indicator not illuminated (The unit will 

still consume some power as long as 
the power cord is still inserted into the 
wall outlet.)

• Standby  ........ Red

Orange (When “Slot power” is set to “On”.)
Orange (Depending on the type of the function board installed, when the power is supplied 
to the slot)
Orange (When “CONTROL I/F SELECT” is set to “LAN” or “WEB CONTROL” is set to “ON”. 
Refer to “Operating Instructions, Network Operations”.)

• Power-ON ...... Green

Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is 
displayed:
“+” : press to move the cursor up 
“–” : press to move the cursor down

Normal Viewing

PICTURE

SETUP

SOUND

POS./SIZE

• PC POWER MANAGEMENT (DPMS)
   ....................... Orange (With PC input signal.)

When this function is set to ON, it operates under the following conditions to turn the power on or
off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal input:

→ Power is turned off (standby); the power indicator lights up orange.

When pictures (HD/VD sync signals) are subsequently detected:

→ Power is turned on; the power indicator lights up green.

• DVI-D POWER MANAGEMENT
   .......................Orange (With DVI input signal.)
• NO SIGNAL POWER OFF
   .......................Red

Equipment power supply is turned OFF when there is no signal.
When this is set to “ENABLE”, the power supply of the unit goes Off 10 minutes after the input 
signals stop.