Panasonic th-p42c10 User Guide

PC terminal

AV4 terminals

Headphone 

jack

SD card slot

Power LED

Standby: red 

 

z

On: green

When using the remote control, indicates the TV has 

 

z

received a command.

Remote control signal receiver

Do not place any objects between the TV remote control signal 

 

z

receiver and remote control.

Function Select

Volume / Contrast / Brightness / Colour / 

 

z

Sharpness / Tint (NTSC mode) / Bass / 

Treble / Balance / Auto Tuning (p. 22 - 23)

Change the channel up/down. When a 

function is displayed, press up/down to 

adjust the setting of the selected function. 

When in standby mode, switches TV on.

Change the input mode

Mains power On / Off switch

Switch On to turn on the TV

 

z

Regular care: Gently wipe the surface clean of dirt by using a soft cloth.

Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent  

(1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Do not tap or scratch the surface with your fingernail or other hard object.

 

z

Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances.  

 

z

This may degrade surface quality.

Regular care: Wipe the surface clean using a soft dry cloth.

Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.

Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Take care not to subject the TV’s surfaces to detergent. A liquid inside the TV could lead to product failure.

 

z

Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances. 

 

z

This may deteriorate the surface by peeling the paint.

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.

 

z

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)

8