Panasonic tc-22lh1 User Guide

Operating peripheral equipment using the remote control

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the
component function buttons for TV, VCR, DBS/CABLE or DVD. Follow the procedures for programming
your Remote Control with or without a code for the component.

Determine the manufacturer of the component and look in the table for the code.

Programming The Illuminated Remote Control Using Access Codes

Confirm that the external component is plugged in and operating.

Turn the component off.

Press the mode key.
The mode key will illuminate steadily, all others will go out.

Enter the 3-digit component code using the Remote Control numeric
keypad.

POWER

VCR

DBS/CBL

POWER

Press the Remote Control

POWER

to test the component. If the

procedure is successful, the component will turn on.

If the component does not operate with the Remote Control, repeat the procedure using
another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the
programming will fail.

Helpful Hints: Unsuccessful Code

Device

VCR

DBS/CBL

DVD

Operates

TV (Panasonic Only)

VCR (Preset)

DBS (Preset), CABLE (Preset)

DVD (Preset)

Default

Panasonic TV Codes

Panasonic VCR Codes

Panasonic DBS Codes

Panasonic DVD Codes

Default Modes For Remote Control

VOL

O K

Press POWER and OK together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and OK keys.