Panasonic tc-32lh1 User Guide

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the
component function buttons for VCR, DVD, AUX, RCVR, TV, DTV, CABLE or DBS. Follow the procedures
for programming your Remote Control with or without a code for the component.

Confirm that the external component is plugged in and operating.

Turn the component off.

Enter the 3-digit component code using the Remote Control numeric
keypad.

Press POWER and OK together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and OK keys.

POWER

  +

POWER

DTV

AUX

DVD

VCR

DBS

RCVR

CBL

TV

Press the mode key.
The mode key will illuminate steadily, all others will go out.

Press the Remote Control 

POWER

 to test the component. If the

procedure is successful, the component will turn on.

TV (Panasonic Only)

DTV (Panasonic Only)

CABLE (Preset)

DBS (Preset)

VCR (Preset)

DVD and CD (Preset)

Personal Video Recorders,
Tape and VCR2

Audio Receiver (Preset)

Panasonic TV Codes

Panasonic DTV Codes

Panasonic CABLE Codes

Panasonic DBS Codes

Panasonic VCR Codes

Panasonic DVD Codes

Panasonic Personal Video
Recorders Code

Panasonic RCVR Code

If the component does not operate with the Remote Control, repeat the
procedure using another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30
seconds,the programming will fail.