Panasonic tc-p50vt20 User Guide

Page of 72
4
5
Safety Precautions
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
Important Safety Instructions
  
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
  
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with 
arrowhead within a triangle is 
intended to tell the user that 
parts inside the product are a risk 
of electric shock to persons.
The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the appliance.
  Do not place any objects on top of the Plasma TV.
  If water spills onto the Plasma TV or foreign objects get 
inside it, a short-circuit may occur which could result in 
fire or electric shock. If any foreign objects get inside the 
Plasma TV, please consult an Authorized Service Center.
  In the unlikely event that you receive a shock from this 
product it is possible that your household outlet may be 
wired improperly. Have an electrician verify that the TV’s 
outlet is properly wired. If the symptom persists, have the 
TV serviced by a qualified authorized technician.
 AC Power Supply Cord
To prevent fire or electric shock:
  The Plasma TV is designed to operate on a 120 V AC, 
60 Hz service. Insert the power cord plug as far as it 
will go into the wall socket.
  If the plug is not fully inserted, heat may generate, which 
could cause a fire.
  The included power cord is for use with this unit only.
  Do not use any power cord other than that provided 
with this TV.
  Do not handle the power cord plug with wet hands.
  Do not do anything that might damage the power 
supply cord.
  When disconnecting the power supply cord, hold the 
plug, not the cord.
  Do not use the power supply cord if the plug or cord is 
damaged.
  Replace the cord or contact your Authorized Service Center.
  Do not use a 3-prong to 2-prong AC plug adaptors to 
connect your TV’s plug to the wall outlet.
  Doing so will defeat the TV plug’s safety feature, which 
can lead to a shock hazard. If the wall outlet does not 
accommodate a 3-prong plug, have a qualified electrician 
replace your outlet and check the associated wiring.
 Handling the power supply cord
  Insert the power plug fully into the socket outlet. (If the 
power plug is loose, it could generate heat and cause fire.)
  Ensure that the power plug is easily accessible.
  Ensure the earth pin on the power plug is securely 
connected to prevent electrical shock.
•  An apparatus with CLASS I construction shall be 
connected to a power socket outlet with a protective 
earthing connection.
  Do not touch the power plug with a wet hand. (This 
may cause electrical shock.)
  Do not use any power cord other than that provided 
with this TV. (This may cause fire or electrical shock.)
  Do not damage the power cord. (A damaged cord may 
cause fire or electrical shock.)
•  Do not move the TV with the cord plugged in the socket outlet.
•  Do not place a heavy object on the cord or place the cord 
near a high-temperature object.
•  Do not twist the cord, bend it excessively, or stretch it.
•  Do not pull on the cord. Hold onto the power plug body 
when disconnecting cord.
•  Do not use a damaged power plug or socket outlet.
  If a problem occurs (such as no picture or no sound), 
or if smoke or an abnormal odor is detected from the 
Plasma TV, unplug the power supply cord immediately.
  Continued use of the TV under these conditions might 
cause a fire or permanent damage to the TV. Have the TV 
evaluated by an Authorized Service Center. Servicing of the 
TV by unauthorized personnel is strongly discouraged due 
to its high voltage.
  If water or an object gets inside the Plasma TV, if the 
Plasma TV is dropped, or if the enclosure becomes 
damaged, unplug the power supply cord immediately.
  A short-circuit may occur, which could cause a fire. Contact 
an Authorized Service Center for an evaluation.
CAUTION
  Do not cover the ventilation holes.
  Doing so may cause the Plasma TV to overheat, which can 
cause a fire or damage to the Plasma TV.
  Leave a space of 3 15/16” (10 cm) or more at the top, 
left and right, and 2 3/4” (7 cm) or more at the rear. 
  When using the pedestal, keep the space between the 
bottom of the TV and the pedestal or stand surface 
clear from objects that may obstruct ventilation.
 When Moving the Plasma TV
  Be sure to disconnect all cables before moving the 
Plasma TV.
  Moving the TV with its cables attached might damage the 
cables which, in turn, can cause fire or electric shock.
  To prevent an electric shock, disconnect the power 
plug from the wall outlet as a safety precaution before 
carrying out any cleaning.
  Transport only in upright position.
  Transporting the unit with its display panel facing upright or 
downward may cause damage to the internal circuitry.
  Using a dry cloth, clean any dust from the power 
supply cord and plug regularly.
  Build-up of dust on the power cord plug can increase 
humidity, which might damage the insulation and cause a 
fire.
This Plasma TV radiates infrared rays; 
  therefore, it may affect other infrared communication 
equipment. Install your infrared sensor in a place away from 
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the 
power supply cord is connected to the wall outlet.
  Display panel is made of glass. Do not apply strong 
force or impact to the display panel.
  This may cause damage resulting in injury.
  The TV is heavy. TV should be handled by 2 or more 
people. Support as shown to avoid injury by the TV 
tipping or falling.
 
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9)  Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.
11)  Only use attachments / accessories specified by the 
manufacturer.
12)  Use only with the cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart / apparatus combination 
to avoid injury from tip-over.
13)  Unplug this apparatus during lightning storms or when 
unused for long periods of time.
14)  Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or has been 
dropped.
15)  To prevent electric shock, ensure the grounding pin on the 
AC cord power plug is securely connected.
WARNING/CAUTION (TV set)
WARNING
Small parts can present choking hazard if accidentally 
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects, 
including packaging materials and plastic bags/sheets to 
prevent them from being played with by young children, 
creating the potential risk of suffocation.
 Set up
  This Plasma TV may fall and can cause personal injury or 
even death if not installed correctly. To prevent personal 
injury or death, follow these warnings:
  Install the Plasma TV in accordance with the 
manufacturer’s recommended pedestal or stand, 
corresponding hardware and installation instructions.
  This Plasma TV is for use only with the following 
optional accessories. Use with any other type of 
optional accessories may cause instability. The following 
accessories are manufactured by Panasonic Corporation.
•  Wall-hanging bracket (Angled) 
  
  TY-WK4P1RW
  Be sure to ask a qualified technician to carry out the 
installation and set-up.
  Two or more people are required to install or remove the 
television.
  Some wall mounts (wall-hanging brackets) are not 
designed to be mounted to walls with steel studs or old 
cinder block constructions.
  Ask your dealer or licensed contractor to properly secure 
the wall-hanging bracket.
  Do not route the TV’s power cord inside the wall.
  The power cord was not designed for in-wall mounting.
Doing so can lead to fire hazard.
  Do not place the Plasma TV or its stand on a sloped or 
unstable surface.
  The Plasma TV may fall or tip over.
  Do not support the Plasma TV on a non-specified pedestal.
  Do not place the Plasma TV on furniture that can easily 
be used as steps, such as a chest of drawers.
  Do not climb or allow children to climb on the Plasma TV
  Place or install the Plasma TV where it cannot be 
pushed, pulled over or knocked down.
  Route all cords and cables such that they cannot be 
tripped over or pulled by curious children.