Panasonic tc-p50v10 Quick Setup Guide

37

 How to Use Menu Functions

(picture, sound quality

, etc.)

Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)
Sets favorite channels. (p. 20)
Changes the station identifier. (p. 51)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 51)

Sets the mode to select the channel with Channel up/down button

• 

Favorite: Only channels registered as FAVORITE (p. 20)

Selects the screen menu language (p. 16)

Adjusts the clock (p. 18)

Sets channels (p. 50)

Selects the terminal and label of the external equipment (p. 53)

To prevent howling, stops output of audio specified in this menu. (p. 53) (On/Off)
Prevents “Image retention” with Wobbling. (Automatic/Periodic)

• 

Automatic: Shifts the display image automatically.

• 

Periodic:   Shifts the display image every (1/2/3/4) minutes according to what was set in the “Time (minutes)” menu.

Sets the time for “Pixel orbiter-Periodic” setting. (1/2/3/4)

Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)

• 

The recommended setting is “Bright” to prevent panel “Image retention”. (p. 60)

Press “OK” to start “Scrolling” on the screen (p. 60)

Controls equipment connected to HDMI terminals (p. 40) (On/Off)

• 

“Power off link”, “Power on link”,  “Stand-by power save”, “Auto power stand-by” and “Default speakers” cannot be selected if “Off” is set.

Sets “Power on link” of HDMI connection equipment (p. 40) (Yes/No)

Sets “Power off link” of HDMI connection equipment (p. 40) (Yes/No)

Set “Stand-by power save” of HDMI connection equipment. (p. 40) (No/Yes)

Set “Auto power stand-by” of HDMI connection equipment. (p. 40) 

Selects the default speakers (p. 40) (TV/Theater)

Sets Network setting (p. 44)

Sets VIERA CAST setting (p. 46)

Set Network Camera status. (Search/Registration/Connection/Deleting/Default setting etc.) (p. 30)

To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed 

for more than 10 minutes. (Enable/Disable)

• 

Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital channel. 

• 

“No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned 

on for the first time after turning the power off by “No signal for 10 minutes”.

• 

The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

To conserve energy, the TV automatically turns off when no operation of remote or side panel key 

continues for more than 3 hours. (Enable/Disable)

• 

Not in use when setting “Auto power on”, “On/Off Timer” or PC input display.

• 

“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on 

for the first time after turning the power off by “No activity for 3 hours”.

• 

The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes)

TV AC cord must be plugged into this device. TV comes on every time the power is restored.

• 

The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 54)

Set to “On”, if you want to light SD card LED while SD card is inserted. (On/Off )

Set “Movie”, “Thumbnail” or “Slideshow” to play back SD cards automatically. 

Displays TV version and software license.

Performing Reset will clear all items set with Setup, such as channel settings. (p. 50)