Panasonic tc-p50v10 Quick Setup Guide

57

 T

echnical 

Information

 Ratings List for Lock

 For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; 

characters might be cut off).  

 The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On 

using the Component or HDMI connection to the TV.  

 If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC 

may overlap on the TV.

 If a digital program is being output in analog format, the CC data will also be output in analog format. 

 If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output 

monitor.

Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the 

format of the received signal and your preference. (p. 20) 

(e.g.:  in case of 4:3 image)

 FULL

 JUST

FULL 

JUST 

Enlarges the 4:3 image horizontally to the screen’s side edges.

(Recommended for anamorphic picture)

Stretches to justify the 4:3 image to the four corners of the 

screen. 

(Recommended for normal TV broadcast)

 H-FILL

 4:3

H-FILL 

Side bar

Enlarges the 4:3 image horizontally to the screen’s side edges. 

The side edges of the image are cut off.

Standard

(Note that “Image retention” of the side bar may occur from

displaying it for a long time.)

 ZOOM

ZOOM

 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):  

  FULL, JUST, 4:3 or ZOOM

 1080p / 1080i / 720p:  

  FULL, H-FILL, JUST, 4:3 or ZOOM

Enlarges the 4:3 image to the entire screen. 

(Recommended for Letter Box)

 Zoom  adjustments

  Vertical image position and size can be adjusted in “ZOOM”.

 

 Select “Zoom adjustments” on the “Picture” menu. (p. 34-35)

 

 V-position:  Vertical position adjustment 

 

    V-size:  Vertical size adjustment

 

  

  

  

  

 To reset the aspect ratio   

 (OK)