Panasonic th-37pg9 User Guide
12
Power ON / OFF
Connecting the plug to the Wall Outlet
Press the Power switch on the Plasma Display to turn the set
on: Power-On.
on: Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the
Plasma Display is turned on. (setting condition is an
example.)
example.)
Connecting the AC cord plug to the Plasma Display.
POWER
Press the
button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the
button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
switch on the unit,
when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
During operation of the power management function, the power indicator turns
orange in the power off state.
Power Indicator
Remote Control Sensor
Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 9)
with the clamper. (see page 9)