Panasonic th-42pe7 User Guide

Page of 53
41
F
AQs, etc.
 T
echnical 
Information
 Ratings List for Lock
Technical Information
Closed Caption (CC)
Aspect Ratio
Lets you choose the aspect depending on the format of the received signal and your preference. (p. 21) 
(e.g.:  in case of 4:3 image)
• 
For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL. 
(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.)
• 
The Closed Caption is not displayed when you use HDMI connection.
• 
If analog connected equipment is used for displaying or recording, Closed Caption (CC) should be set On/Off on 
the connected equipment.
The CC mode setting of the TV will not affect the analog input.
If a digital program is being output in analog format, the CC data will also be output in analog format.
  If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV.
  If CC is set On on both the connected equipment and the TV, captions from each unit will overlap.
• 
FULL
• 
JUST
FULL
JUST
Enlarges the 4:3 image horizontally to the screen’s side edges.
(Recommended for anamorphic picture)
Stretches to justify the 4:3 image to the four corners of the 
screen. 
(Recommended for normal TV broadcast)
• 
H-FILL
• 
4:3
H-FILL
Enlarges the 4:3 image horizontally to the screen’s side edges. 
The side edges of the image are cut off.
Standard
(Note that “Image retention” of the side bar may occur from
displaying it for a long time.)
• 
ZOOM
ZOOM
Enlarges the 4:3 image to the entire screen. 
(Recommended for Letter Box)
• 
Zoom adjust
 
Vertical image position and size can be adjusted in “ZOOM”.
 Select “Zoom adjust” on the “Picture” menu. (p. 24-25)
 V-position:  Vertical position adjustment 
 
 V-size:  Vertical size adjustment
Side bar
• 
To reset the aspect ratio 
 
 (OK)
Note
• 
480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):  
  FULL, JUST, 4:3 or ZOOM
• 
1080p / 1080i / 720p:  
  FULL, H-FILL, JUST, 4:3 or ZOOM
• 
When the signal is 720p/1080i/1080p, the aspect mode 
automatically defaults to Full after turning off the TV, 
after changing input mode, or after changed signal 
resolution other than 720p/1080i/1080p.