Panasonic th-42pz800 User Guide
39
Advanced
Programming the Remote to Operate Peripheral Equipment
Using
T
imer
You can operate other manufacturers’ equipment using this TV’s remote control.
Connect the external equipment to the TV and
Power Off the external equipment
Press both buttons simultaneously for
more than 3 seconds.
more than 3 seconds.
•
Release the buttons when the equipment selection
buttons start flashing.
buttons start flashing.
Select the equipment
with the equipment selection button
•
The selected button remains lit (other buttons are not lit).
Input the equipment’s 4-digit remote
control code
control code
(p. 43-44)
Operate the equipment with the remote
control
control
(p. 42)
•
The external equipment turns On.
■
If the equipment does not operate with the
remote control
remote control
•
When your equipment has a single code
Input the remote control code again
•
When your equipment has multiple codes
Change the code with above and test again
•
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
To find a code not listed in the code list
This procedure searches all codes and is called the “sequence method.”
Caution
After step above, change the code and
test
When the correct code is found
store
Operate the equipment with the remote
control (p. 42)
control (p. 42)
•
Repeat until the code is found
•
It may take many attempts before the correct
code is found
code is found
change
4
1
2
3
5
+
■
Press to return to the TV
mode
mode
Programming the Remote to Operate
Peripheral Equipment
Peripheral Equipment