Panasonic th-50phw3 User Guide

Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode.

Press to select each item.

Press to adjust.

SIGNAL

[ RGB ]

SYNC
PULL-IN RANGE

H-FREQ. kHz
V-FREQ. Hz

H & V

NARROW

31.5

60.0

CLAMP POSITION

SIGNAL

[ PC ]

SYNC
PULL-IN RANGE

H-FREQ. kHz
V-FREQ. Hz

H & V

NARROW

31.5

60.0

CLAMP POSITION

The following operation methods are the same for both the SIGNAL [RGB]
and SIGNAL [PC].

SYNC

SYNC

H & V

SYNC

ON VIDEO

SYNC

ON G

Setting RGB sync signal setting:

Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).

H&V:

The H and V sync signals are input from the HD/VD (BNC) connector.

ON G:

Uses a synchronized signal on the Video G signal, which is input
from the G (BNC) connector.

ON VIDEO: Compatible with the scart plug (Europe)

The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals.

Sets the width for different frequencies.

(This setting is the same for both SIGNAL [RGB] and SIGNAL [PC].)

Setting PC sync signal setting:

Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT).

H&V: The H and V sync signals are input from the HD/VD (BNC) connector.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G (BNC) connector.

PULL IN RANGE

PULL IN RANGE

WIDE

PULL IN RANGE

NARROW

Displays the H (Horizontal)/V (Vertical) frequencies.

This display is valid only for RGB input and PC input.
Display range:

Horizontal 15.5 - 110 kHz
Vertical 48 - 120 Hz

H-FREQ (kHz)/V-FREQ (Hz)

H-FREQ. kHz
V-FREQ. Hz

31.5

60.0

SET UP for Input Signals

CLAMP POSITION

SIGNAL

[ COMPONENT ]

CLAMP POSITION

Adjusts the clamp position.

The following operation methods are the same for “SIGNAL” menu during
COMPONENT, RGB and PC input signal mode.
Normally, these adjustments are set to appropriate levels and, therefore, do not
need to be altered.

CLAMP POSITION