Panasonic th-65phd7 User Guide

Effect                                Adjustments

Less             More

Darker           Brighter

Reddish        Greenish

Adjusts the proper picture contrast.

Adjusts for easier viewing of dark pictures
such as night scenes and black hair.

Adjusts color saturation.

Adjust for natural flesh tones.

Adjusts picture sharpness.

Notes:
• “COLOR” and “TINT” settings cannot be

adjusted for “RGB/PC” and “DVI” input
signal.

• You can change the level of each function

(PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS) for each PICTURE MENU.

• The setting details for STANDARD,

DYNAMIC and CINEMA respectively are
memorized separately for each input mode
(INPUT1, INPUT2 , INPUT3 and PC IN).

• The “TINT” setting can be adjusted for

N T S C   s i g n a l   o n l y   d u r i n g   “ V I D E O
(S VIDEO)” input signal.

• In PICTURE, there is nor a noticeable

change even when contrast is increased
with a bright picture or reduced with a dark
picture.

Less             More

Less             More

Notes:
• Carry out “W/B” adjustment as follows.

1. Adjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings.
2. Adjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings.
3. Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

• The adjustment values are memorized separately for each input mode (INPUT1, INPUT2 , INPUT3 and PC IN).
• The adjustment range values should be used as an adjustment reference.

Less             More

Less             More

Less             More

Less             More

Down              Up

Less             More

Less             More

OFF              ON

Adjusts the dark shades of the image in gradiation.

Adjustment of parts which are extremely bright and hard to see.
(This cannot be adjusted when the input signal is DVI.)

Adjusts the white balance for light red areas.

Adjusts the white balance for light blue areas.

Adjusts the white balance for dark red areas.

Adjusts the white balance for dark blue areas.

S CURVE  

  2.0  

  2.2  

  2.5

Increases the brightness of dark signal automatically.

On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at
any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the
factory settings.

N

NORMALIZE