Panasonic ca-lsr10 User Guide
Mounting
When disconnecting a locked cable, press the
lock in the arrowed direction while removing the
connector.
lock in the arrowed direction while removing the
connector.
Pulling too strongly will
break the connector. Check
that the lock is disengaged
before trying to disconnect
the connector.
that the lock is disengaged
before trying to disconnect
the connector.
Power
connector
connector
How to attach a clip connector
Insert the cable into the clip
connector.
Vehicle-side wiring cable
Battery lead of this product
(Example)
(Example)
Press the element into place.
Close the cover.
Mounting the I/F Box on the
carpet, etc.
Preparation:
Wipe all dirt (oil, dust, etc.) off the mounting
surface, and dry any moisture.
Note:
Do not mount the I/F Box in the following locations.
Doing so may cause a malfunction.
Do not mount the I/F Box in the following locations.
Doing so may cause a malfunction.
Where exposed to water
Where the unit may be stepped on
Very dusty place
Near a heater duct or object that generates heat
Where exposed to direct sunlight
Where heat builds up such as beneath the carpet
Wiring
Velcro tape
English
30
30
01_YFM264C082CA_English.indd 30
01_YFM264C082CA_English.indd 30
2007/08/06 12:35:22
2007/08/06 12:35:22