Panasonic sv-pt1 User Manual

PC Mode (Operation with the PC)

CANC

ENU

/SET

SET

Make connections following “Setup (Connections)” steps on page 42.

Select and change to another card.
• With a USB cable connected, selecting another card will terminate

communication with the PC. Do Steps 1~4 of “Disconnecting Unit from PC” on
page 45, then proceed with the following operation.

Press

to select “SD” or “HDD (PC Card)”,

then press SET.
• While the SD or HDD lamp is flashing, “CANNOT

CHANGE SLOT” is displayed and operation is not
possible. After the lamp goes out, press SET again.

File Operations

When this unit is connected to a PC using the USB Cable provided (p. 42), it will be
recognized as a Removable Disk. You can then copy, move, delete, and display files
on this unit the same as with a normal disk drive.

HDD Lamp

SD Lamp

• Drive letters (e.g. “H:”) and method of opening My Computer may vary depending on the PC.
• With USB cable connected, the “Removable Disk” icon will not appear while the SD or HDD

Lamp flashes as the PC checks the connection. Check for the icon once the indicator goes
out. It may take several minutes for the PC to recognize the PC Card HDD device.

– Note –

Liquid Crystal
Display

(Liquid Crystal Display)

Double-click [My Computer], then
double-click [Removable Disk].

• Files contained on the card will be

displayed and normal PC operations can
be done.

• If no removable disk is found, refer to

“Reinstalling the Device Driver” on page 48.

PT1.p42-45.p65

2003/01/14, 12:37