Panasonic bb-hgw700 User Manual

Operating Instructions

106

The connection, disconnection and authentication logs during PPPoE or DHCP connection are 
displayed. You can check the connecting IP address in the connection log. 100 logs can be displayed 
on 1 page and 400 can be recorded in total. When there are more than 100 logs, select the page 
number at the bottom of the page and search for the required log.

This is the log number. Numbers are attributed from the most recent.

The time when this product performed the port operation is 
displayed. The time is calculated based on the PC's clock. If the time 
looks incorrect, adjust your clock's settings.

The content of the port operation is displayed. The message 
displayed is one of the following:
•

[Port addition]: Port was added.

•

[Port addition failure]: Port was not added.

•

[Port removal]: Port was deleted.

•

[Port removal (by user operation)]: Port was deleted by the user.

•

[Port removal failure]: Port was not deleted.

•

[All port removal (by user operation)]: All ports were deleted by 
the user.

•

[Auto port removal (by user operation)]: The time set in Automatic 
deletion of UPnP port mapping has passed.

•

[Auto port removal (by application setting)]: The time specified by 
the application in use has passed.

•

[Port addition failure (only permanent)]: Port was not added.

•

[Port addition failure (require same port for internal/external)]: 
Port was not added.

The client side's IP address and port number in the specified port 
information is displayed.

The protocol for the specified information is displayed. TCP or UDP 
is displayed.

The external (WAN side) port number in the specified port 
information is displayed.

Click [Log] on the setup page.

Click [Display] Connection Log.