Billion s100n Quick Setup Guide
NOTE:
Ensure that the BiGuard S100N
is turned off before beginning to
setup.
is turned off before beginning to
setup.
NOTE:
Out of Box
Carefully unpack the BiGuard S100N and
check that the following items are
included.
check that the following items are
included.
1. BiGuard S100N
2. Power Adapter (15V / 1.6A)
3. Warranty card x 1
4. Quick Start Guide x 1
5. User Manual CD x 1
6. Ethernet cable x 1
7. Antenna x 3
2. Power Adapter (15V / 1.6A)
3. Warranty card x 1
4. Quick Start Guide x 1
5. User Manual CD x 1
6. Ethernet cable x 1
7. Antenna x 3
Front and Rear View
LED
1. Status
2. Power
3. Wireless
4. USB
5. WAN
6. LAN
7. DMZ
1. Status
2. Power
3. Wireless
4. USB
5. WAN
6. LAN
7. DMZ
Physical Interface
8. Power connector
9. Power switch
10. USB connector
11. WAN RJ-45 connectors
12. LAN 1~4 100/1000M RJ-45
8. Power connector
9. Power switch
10. USB connector
11. WAN RJ-45 connectors
12. LAN 1~4 100/1000M RJ-45
connectors.
13. Reset button
14. WPS button
15. Wireless antenna
14. WPS button
15. Wireless antenna
Ensure that your hardware is
powered off, including the BiGuard
S100N.
powered off, including the BiGuard
S100N.
Connect an RJ-45 Ethernet cable
to the WAN port on the BiGuard
S100N, and connect the other end
to an ADSL or cable modem or
another router.
to the WAN port on the BiGuard
S100N, and connect the other end
to an ADSL or cable modem or
another router.
Connect switches, hubs, and
servers to the four LAN ports on
the BiGuard S100N.
servers to the four LAN ports on
the BiGuard S100N.
Connect the power cable to the
connector on the BiGuard S100N
and connect the power adapter to
an electrical outlet. Turn the power
button to the On position.
connector on the BiGuard S100N
and connect the power adapter to
an electrical outlet. Turn the power
button to the On position.
CONNECTING THE BiGuard S100N
The BiGuard S100N
1
2
NOTE:
Ensure that the BiGuard S6000
is turned off before beginning
setup.
is turned off before beginning
setup.
Logging In
In the Address field of your Web
browser, type the default IP address:
192.168.1.254.
browser, type the default IP address:
192.168.1.254.
A Security Alert screen appears.
Click Yes to continue. The login
screen appears.
Click Yes to continue. The login
screen appears.
Type the default user name and
password:
User Name: admin
Password: admin
Then click Login. The Web Manager
opens on the Status menu.
password:
User Name: admin
Password: admin
Then click Login. The Web Manager
opens on the Status menu.
Configuring the WAN for PPPoE
CONFIGURING THE WAN
3
A.
B.
C.
A.
C.
B.
Register Your BiGuard Gateway
Once you have established an
Internet connection, please
register your BiGuard gateway
at www.biguard.com for
firmware updates, the latest
information and technical
support. It is crucial that you
register as soon as possible to
enjoy the benefits of possessing
a BiGuard gateway.
Once you have established an
Internet connection, please
register your BiGuard gateway
at www.biguard.com for
firmware updates, the latest
information and technical
support. It is crucial that you
register as soon as possible to
enjoy the benefits of possessing
a BiGuard gateway.
2
1
3
4
B.
A.
C.
B.
Type the user name in the
Username field.
Username field.
Type and confirm the password in
the Password and Retype
Password fields.
the Password and Retype
Password fields.
Select Always On or Connect on
Demand from the Connection
drop-down menu. If you select
Connect on Demand, the following
Idle Timeout field is available.
Demand from the Connection
drop-down menu. If you select
Connect on Demand, the following
Idle Timeout field is available.
Type the number (of minutes) in the
Idle Timeout field. If your
connection is Connect on Demand,
you are disconnected after the idle
timeout period.
Idle Timeout field. If your
connection is Connect on Demand,
you are disconnected after the idle
timeout period.
D.
E.
F.
G.
H.
A.
B.
B.
C.
D.
E.
F.
G.
H.
I.
B.
5
6
Configuring the WAN for Static IP
B.
A.
F.
6
A.
B.
B.
C.
D.
E.
F.
Click Quick Start in the Menu bar.
Click WAN. The Quick Start WAN
screen appears.
screen appears.
Select Obtain an IP Address
Automatically from the Protocol
drop-down menu.
Automatically from the Protocol
drop-down menu.
Check Obtain DNS Automatically
if your ISP provides this with the
assigned IP. Otherwise, enter the
Primary and Secondary DNS
provided by your ISP.
if your ISP provides this with the
assigned IP. Otherwise, enter the
Primary and Secondary DNS
provided by your ISP.
Configuring the WAN for DHCP
B.
Check Obtain DNS Automatically
if your ISP provides this with the
assigned IP. Otherwise, enter the
Primary and Secondary DNS
provided by your ISP provider.
if your ISP provides this with the
assigned IP. Otherwise, enter the
Primary and Secondary DNS
provided by your ISP provider.
Click Apply to confirm the settings.
IP address
Subnet mask
Gateway
DNS
Subnet mask
Gateway
DNS
Click Quick Start in the Menu bar.
Click WAN. The Quick Start WAN
screen opens.
screen opens.
Select Static IP from the Protocol
drop-down menu.
drop-down menu.
Type the IP address in the IP
Address field.
Address field.
Type the subnet mask in the Subnet
Mask field.
Mask field.
Type the gateway in the Gateway
field.
field.
To configure the WAN for static IP, you will need the following information from your
ISP provider:
ISP provider:
Type the primary/secondary DNS
in the DNS fields.
in the DNS fields.
Click Apply to confirm the settings.
You configure and manage the BiGuard S100N with the Web Manager. The Web
Manager is a web-based interface that you can access from any web browser.
Manager is a web-based interface that you can access from any web browser.
To configure the WAN for PPPoE, you need the following information from your ISP
provider:
provider:
User name
Password
DNS (if necessary)
(contact your ISP for more information)
Password
DNS (if necessary)
(contact your ISP for more information)
Click Quick Start in the Menu bar.
Click WAN. The Quick Start WAN
screen opens.
screen opens.
Select PPPoE from the Protocol
drop-down menu.
drop-down menu.
Configuring SSL VPN
This section describes how to configure the BiGuard S100N with basic settings so
that the SSL VPN default group is accessible from outside your network. Before a
user can access the SSL VPN, a Group user account must be set up for them.
that the SSL VPN default group is accessible from outside your network. Before a
user can access the SSL VPN, a Group user account must be set up for them.
Click Quick Start
→
SSL VPN in
the Menu bar. The Quick Start SSL
VPN screen appears.
VPN screen appears.
If you have created new Groups,
you can select one from the
drop-down
you can select one from the
drop-down
menu.
Otherwise,
leave the default Group selected
and click Next. The following
screen appears (Note: You can
choose to Add Applications to
the Group now or add it later).
and click Next. The following
screen appears (Note: You can
choose to Add Applications to
the Group now or add it later).
Type a user name for a user in the
User Name field.
User Name field.
Type and confirm a password in
the Password and Retype
Password fields.
the Password and Retype
Password fields.
B.
A.
C.
D.
CONFIGURING SSL VPN
4
Click Apply to confirm the settings.
Congratulations. You successfully
finished the BiGuard S100N router
configuration.
finished the BiGuard S100N router
configuration.
A.
B.
C.
D.