Billion 7402r2 User Manual

BiPAC 7402R2 ADSL2+ VPN Firewall Router

Chapter 4: Configuration

Configure a new VPN Connection

Connection Name:

A user-defined name for the connection (e.g. “connection to office”).

Local:

Network:

Set the IP address, subnet or address range of the local network.

Single Address:

The IP address of the local host.

Subnet:

The subnet of the local network. For example, IP: 192.168.1.0 with netmask 255.255.255.0

specifies one class C subnet starting from 192.168.1.1 (i.e. 192.168.1.1 through to 192.168.1.254).

IP Range:

The IP address range of the local network. For example, IP: 192.168.1.1, end IP:

192.168.1.10

Remote:

Secure Gateway Address (or Domain Name):

The IP address or hostname of the remote VPN device

that is connected and establishes a VPN tunnel.

Network:

Set the IP address, subnet or address range of the remote network.

Proposal:

Select the IPSec security method. There are two methods of checking the authentication

information, AH (authentication header) and ESP (Encapsulating Security Payload). Use ESP for greater
security so that data will be encrypted and authenticated. Using AH data will be authenticated but not
encrypted.

Authentication:

Authentication establishes the integrity of the datagram and ensures it is not tampered

with in transmit. There are three options, Message Digest 5 (MD5), Secure Hash Algorithm (SHA1) or
NONE

. SHA1 is more resistant to brute-force attacks than MD5, however it is slower.

MD5:

A one-way hashing algorithm that produces a 128−bit hash.