Sony kdl-40s4100 Quick Setup Guide

KDL-40/46S4100 EN 3-870-416-12(1)

3-870-416-12(1)

Your new TV includes various types of video inputs and two types of audio jacks; RCA type 

and digital audio (optical). Use the outputs/inputs that are available on your components 

that provide the best audio/video performances:

Best Audio/Video  

Performance

Digital Audio Out
(Optical)

HDMI (High-Definition 
Multimedia Interface) 

Analog Audio

Component video

S VIDEO

Composite video

The connection diagrams shown below and on the reverse side are recommendations only; other 

possible solutions may exist. Connections that include an AV receiver can often be complex, so check 

your AV receiver’s instruction manual for additional details.
See the “Cables Required” chart that appears with the diagram to determine which cables you’ll need. 

Depending on the components you plan to connect, you may need to purchase extra cables.
If your connecting equipment has DVI output instead of the HDMI output, you must use DVI-to-

HDMI cable or a DVI to HDMI adapter for the video and also connect an audio cable for the sound.

~

~

~

©2008 Sony Corporation     Printed in China

For further information, see the Operating Instruction Manual supplied with the TV. 

Please retain this guide for your future reference.

Cables Required
Splitter

1

Coaxial

4

HDMI

2

Optical  Audio

3

Cables Required
Splitter

1

Coaxial

4

HDMI

2

Upgrade your signal to high-definition programming to view the same picture 

quality at home as you’ve seen in the store. Contact your cable or satellite provider 

for upgrading to high-definition TV for stunning detail and richer sound.

Continued  

Select the language for the OSD (on screen display).

Connect either cable or antenna to your TV (you can  

connect both using an A-B RF switch). If you connect 

cable, the TV will scan cable channels. After this 

scanning, you can search antenna channels as well.

If you have cable and antenna connection available, please 

connect cable first.
If you are not using the CABLE/ANTENNA connection to 

TV, you can cancel the Auto Program by selecting 

Cancel.

Your TV will detect the type of signal connected and will  

start scanning for the channels.

If the Initial Setup programming found cable channels, 

you will be able to scan antenna channels as well. 

Connect the antenna (using an A-B RF switch, not 

supplied) and change the switch to antenna, then start 

Auto Program to search antenna channels.

~

~

Please contact Sony directly if you have questions on the use of your television  

after reading your Quick Setup Guide and Operating Instruction Manual.

Contact Sony Customer Support at:

Or to speak with a support representative:

1-800-222-SONY (7669) 

1-877-899-SONY (7669)