Panasonic KX-TG1032 User Guide

For assistance, please visit http://www.panasonic.com/help

9

Connect the telephone line cord until it 
clicks into the base unit and telephone 
line jack (

A). Connect the AC adaptor 

cord (

B) by pressing the plug firmly 

(

C).

L

Use only the included Panasonic AC 
adaptor PQLV207.

Note:
L

The AC adaptor must remain 
connected at all times. (It is normal for 
the adaptor to feel warm during use.)

L

The AC adaptor should be connected 
to a vertically oriented or floor-
mounted AC outlet. Do not connect 
the AC adaptor to a ceiling-mounted 
AC outlet, as the weight of the 
adaptor may cause it to become 
disconnected.

L

The unit will not work during a power 
failure. We recommend connecting a 
corded telephone to the same 
telephone line or to the same 
telephone line jack using a Panasonic 
T-adaptor (page 5).

If you subscribe to a DSL service
Please attach a noise filter (contact your 
DSL provider) to the telephone line 
between the base unit and the 
telephone line jack in the event of the 
following:
– Noise is heard during conversations.
– Caller ID features do not function 

properly.

L

Use only the included Panasonic AC 
adaptor PQLV209.

To single-line 
telephone jack 
(RJ11C)

A

B

(120 V AC, 
60 Hz)

Hook

C

Noise filter

To single-line 
telephone 
jack (RJ11C)

(120 V AC, 60 Hz)

Fasten the AC adaptor cord to 
prevent it from being disconnected.

Bottom of the charger

Hooks

Hooks

TG103x.book  Page 9  Wednesday, June 27, 2007  9:55 AM