Panasonic kx-tg2219 Reference Guide

This document is a text description of the control panel 
layout for the product listed below.   
“PDF” files of the complete operating instructions are 
available from the Customer Support section of 
www.Panasonic.com.

     

If you need the operating instructions in an alternate 
format, please request it from Customer Support.

     

 

Model Number KX-TG2219B 
2.4GHz Digital Cordless Phone 

 

Handset:  

With the handset buttons facing you, the antenna is a narrow 2 inch long protrusion on the top right. 

Just below the top on the front of the handset is a shallow oval concave. This is the earpiece. The 

smooth surface below the earpiece is the display. Immediately blow the display are three buttons in a 

horizontal row: from left to right, they are FUNCTION, MUTE, and VOICE ENHANCER buttons. 

Below these buttons in the center of the handset is the NAVIGATOR KEY, which is a large 

rectangular control with four active areas. The active areas are at the 12 o’clock, 3 o’clock, 6 o’clock, 

and 9 o’clock positions. The 12 and 6 o’clock positions are the UP and DOWN keys and also control 

volume up and down during a call. The 3 and 9 o’clock positions are the LEFT and RIGHT arrow 

keys. The 3 o’clock position is often used as ‘Yes’ key during programming. These keys are also the 

EDIT and CHANNEL keys respectively. To the upper left of the Navigator key, an oval button with 

a clipped edge is the TALK button. The oval button below the TALK button is the SPEAKER 

PHONE button. To the upper right of the NAVIGATOR KEY, an oval button with a clipped edge is 

the OFF button. The oval button below the OFF button is the HOLD button. The HOLD button is 

also the CLEAR button. Below these buttons is the keypad laid out in the conventional telephone 

arrangement with a “nib” on the 5 button. On the lower left below the keypad is the FLASH button. 

The FLASH button is also the CALL WAIT or VOICE MAIL button. On the lower right of the 

keypad is the REDIAL button. The REDIAL button is also the PAUSE button. The indentation 

between the FLASH and REDIAL button is the microphone. The 2 metal ridges at the bottom of the 

handset are the charge contacts. On the left edge of the handset, parallel to the TALK button, is the 

headset jack covered with a little round rubber. This cover is opened from front to back, and is not 

completely removable. The triangular pattern of raised texture on the back side of the handset 

identifies the battery compartment. The battery door is opened by pushing in and down on this area. 

 
Base Unit: