WatchGuard x1000 User Guide
Viewing Details on Firebox Activity
User Guide
95
ARP table
A snapshot of the ARP table on the running
Firebox. The ARP table is used to map IP addresses
to hardware addresses.
Firebox. The ARP table is used to map IP addresses
to hardware addresses.
ARP Table
Address HWtype HWaddress Flags Mask
Iface
207.23.8.32 ether 00:20:AF:B6:FA:29 C *
eth1
207.23.8.52 ether 00:A0:24:2B:C3:E6 C *
eth1
207.23.8.21 ether 00:80:AD:19:1F:80 C *
eth0
201.148.32.54 ether 00:A0:24:4B:95:67 C *
eth1:0
201.148.32.26 ether 00:A0:24:4B:98:7F C *
eth1:0
207.23.8.30 ether 00:A0:24:79:96:42 C *
eth0
Address HWtype HWaddress Flags Mask
Iface
207.23.8.32 ether 00:20:AF:B6:FA:29 C *
eth1
207.23.8.52 ether 00:A0:24:2B:C3:E6 C *
eth1
207.23.8.21 ether 00:80:AD:19:1F:80 C *
eth0
201.148.32.54 ether 00:A0:24:4B:95:67 C *
eth1:0
201.148.32.26 ether 00:A0:24:4B:98:7F C *
eth1:0
207.23.8.30 ether 00:A0:24:79:96:42 C *
eth0
For more information on the status report page, see the fol-
lowing FAQ:
lowing FAQ:
Authentication list
The Authentication List tab displays the host IP addresses
and user names of everyone currently authenticated to the
Firebox. If you are using DHCP, the IP address—to—user
name mapping may change whenever machines restart.
and user names of everyone currently authenticated to the
Firebox. If you are using DHCP, the IP address—to—user
name mapping may change whenever machines restart.