Wiebetech cgb User Guide
WiebeTech LLC
Technical Specifications
Product Name & Code
ComboGB (CGB)
Interface Types & Speeds
FireWire 800 port
: up to 800 Mbps
FireWire 400 port
: up to 400 Mbps
USB 2.0 port
: up to 480 Mbps
Chipset
Oxford OXUF922 and TI TSB81BA3
Compatibility
Drive: 2.5” PATA (IDE) hard disk drives, 9.5mm.
Supports PIO modes 0-4, DMA modes 0-2, and Ultra DMA modes 0-5.
Supports PIO modes 0-4, DMA modes 0-2, and Ultra DMA modes 0-5.
Operating System
Requirements
Requirements
FireWire 400
: Windows 98SE, ME, 2000, XP, Mac OS 9.1, 9.2, OS X,
Linux distributions supporting FireWire
FireWire 800
FireWire 800
: Windows XP, Mac OS 10.2 or above
USB
: Windows 2K, XP, Mac OS 9.1 or above (10.2 or above for USB 2.0 speed)
Optional Power Supply
+5V, 1-2 Amp, available as an optional purchase. Product code: PWR-2.
Dimensions of barrel connector: 1.3mm x 3.5mm x 10mm
Dimensions of barrel connector: 1.3mm x 3.5mm x 10mm
Operating Temperature
50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity
5% to 95%, noncondensing
Certification
FCC, CE
EMI Compatibility: FCC Part 15, Class B CE mark, Commercial
EMI Compatibility: FCC Part 15, Class B CE mark, Commercial
Shipping Weight
2 pounds
Dimensions
5.4” x 3.2” x .8” (135mm L x 81mm W x 20mm H)
Warranty
1-year limited warranty. See warranty statement for details and limitations.
WiebeTech offers free phone support for 90 days after purchase (1-866-744-8722).
Email support is available at
WiebeTech offers free phone support for 90 days after purchase (1-866-744-8722).
Email support is available at
support@wiebetech.com
.
ComboGB is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.
© 2004, 2006 WiebeTech LLC. All rights reserved.
FCC Compliance Statement.
“This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
operation.”
ComboGB
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that the bottom plate and case of your attached drive is grounded, either to the ComboGB case or to an Earth ground.
2)
Use a FireWire cable with RFI reducing ferrites on each end.
3)
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact
support@wiebetech.com
for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact
sales@wiebetech.com
. We
appreciate being able to serve you!
C o m b o G B U s e r M a n u a l
- 6 -