Sony kdl-32e4020 User Guide

 GB

~
“Sound Effect”, “Treble”, “Bass”, “Balance” and “Auto Volume” are not available when “Speaker” is set to “Audio System”.

 

Resets all the sound settings to the factory settings.

Adjusts higher-pitched sounds.

Adjusts lower-pitched sounds.

Emphasizes left or right speaker balance.

Keeps a constant volume level even when volume level gaps occur (e.g., adverts 
tend to be louder than programmes).

~

If you set “Sound Effect” to “Dolby Virtual”, “Auto Volume” changes to “Off”. 

Adjusts the volume level of the current input relative to other inputs.

Selects the sound from the speaker for a stereo or bilingual broadcast.
“Stereo/ Mono”: For a stereo broadcast.
“A/ B/ Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” 
for sound channel 2, or “Mono” for a mono channel, if available.

z

If you select other equipment connected to the TV, set “Dual Sound” to 
“Stereo”, “A” or “B”.

The TV turns on faster than usual within two hours after switching to standby 
mode. However, power consumption in standby mode is higher than usual.

Selects the power saving mode to reduce the power consumption of the TV. 
When “Picture Off” is selected, the picture is switched off and the 

 (Picture 

Off) indicator on the TV front panel lights up in green. The sound remains 
unchanged.
“Standard Power”: Default settings.
“Reduced Power”: Reduces the power consumption of the TV.
“Picture Off”: Switches off the picture. You can listen to the sound with the 
picture off.

“On”: Automatically optimises the picture settings according to the ambient 
light in the room.
“Off”: Turns off the “Light Sensor” feature.

~

Be sure not to put anything over the sensor, as its function may be affected. See 
page 12 for the location of the light sensor.

Lights up and turns off the Sony logo on the front of the TV.

010COV.book  Page 24  Thursday, September 25, 2008  4:59 PM