Panasonic kx-tg2730 User Guide
Room Monitor Feature
56
This feature allows you to monitor a room through the handset or the base unit by
using the intercom feature. For example you can monitor a baby from different
areas of the house. You can call the handset or the base unit using the extension
number, to monitor the room. The called unit will not ring. When the system has
one or more additional handsets (p. 26), a handset user can monitor through
another handset. If you allow other users to monitor through your handset or base
unit, turn the feature on. If you want to prevent your unit from being monitored by
other extensions, leave this feature off (factory preset). The destination unit must
not be used and the destination handset must be off the base unit (p. 57).
using the intercom feature. For example you can monitor a baby from different
areas of the house. You can call the handset or the base unit using the extension
number, to monitor the room. The called unit will not ring. When the system has
one or more additional handsets (p. 26), a handset user can monitor through
another handset. If you allow other users to monitor through your handset or base
unit, turn the feature on. If you want to prevent your unit from being monitored by
other extensions, leave this feature off (factory preset). The destination unit must
not be used and the destination handset must be off the base unit (p. 57).
To turn the handset Room Monitor feature on
(to allow other users to monitor through your handset)
Make sure the handset is not being used.
Make sure the handset is not being used.
1
Press
(CONF/FUNCTION)
, and scroll to
“Initial setting” by pressing
Ö
or
Ñ
, and press
á
.
2
Scroll to “Room monitor” by pressing
Ö
or
Ñ
, and press
á
.
3
Select “On” by pressing
Ö
or
Ñ
, and
press the right soft key (
).
•A beep sounds.
•To exit the programming mode, press (OFF).
•To prevent your handset from being monitored, select “Off” in step 3 and press
the right soft key (
).
To turn the base unit Room Monitor feature on
(to allow the handset to monitor through the base unit)
Use the handset. Make sure the base unit and the handset are not being used.
Use the handset. Make sure the base unit and the handset are not being used.
1
Press
(CONF/FUNCTION)
, and scroll to “Initial setting” by
pressing
Ö
or
Ñ
, and press
á
.
2
Scroll to “Set base unit” by pressing
Ö
or
Ñ
, and press
á
.
3
Scroll to “Room monitor” by pressing
Ö
or
Ñ
, and press
á
.
4
Select “On” by pressing
Ö
or
Ñ
,
and press the right soft key (
).
•A beep sounds.
•To exit the programming mode, press (OFF).
•To prevent your base unit from being monitored, select “Off” in step 4 and press
the right soft key (
).
SAVE
SAVE
SAVE
SAVE
Room monitor
000
:On
GF
S A V E
Auto talk
H
Room monitor
Caller ID edit
Copy directory
H
Initial setting
2Way radio mode
Set answering
H
Set base unit
Registration
Incoming call
H
Room monitor
---------------
Room monitor
000
:On
GF
S A V E