Panasonic KX-TG5451 User Guide
Programmable Settings
40
For assistance, please call 1-800-211-PANA (7262).
Base unit settings
Base unit ringer volume
4 levels (high/medium/low/off) are
available. The default setting is HIGH.
available. The default setting is HIGH.
Important:
L
Make sure the base unit is not being
used.
used.
Press {<} or {>} repeatedly to select the
desired volume.
desired volume.
L
To stop ringing, press {STOP}.
To turn the ringer off, press and hold {<}
until the unit beeps 2 times.
until the unit beeps 2 times.
L
“
O
” will be displayed.
Base unit ringer tone
You can change the base unit ringer tone
heard when an outside call is received.
There are 3 tones and 4 melodies. The
default setting is “Tone 1”.
This feature must be set by using the
handset.
heard when an outside call is received.
There are 3 tones and 4 melodies. The
default setting is “Tone 1”.
This feature must be set by using the
handset.
1
Press {MENU}.
2
Scroll to “Initial setting” by
pressing {V} or {^}, then press {
pressing {V} or {^}, then press {
>}.
3
Scroll to “Set base unit” by pressing
{V}
{V}
or {^}, then press {
>}.
4
Scroll to “Ringer tone” by pressing
{V}
{V}
or {^}, then press {
>}.
5
Press {V} or {^} repeatedly to select
the desired setting.
the desired setting.
L
You can also select the ringer tone by
pressing {1} to {7}.
pressing {1} to {7}.
L
If the ringer volume has been turned
off, the base unit will not ring.
off, the base unit will not ring.
6
Press {Save}, then press {OFF}.
Note:
L
If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody, you will not be able to
distinguish lines by their ringers.
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody, you will not be able to
distinguish lines by their ringers.
L
If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
same line.
Base unit interrupt tone
This tone lets you know when you receive
a call while you are on an intercom call
(page 31).
“2” (default): The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
“Off”: Turns this feature off.
This feature must be set by using the
handset.
a call while you are on an intercom call
(page 31).
“2” (default): The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
“Off”: Turns this feature off.
This feature must be set by using the
handset.
1
Press {MENU}.
2
Scroll to “Initial setting” by
pressing {V} or {^}, then press {
pressing {V} or {^}, then press {
>}.
3
Scroll to “Set base unit” by pressing
{V}
{V}
or {^}, then press {
>}.
4
Scroll to “Interrupt tone” by
pressing {V} or {^}, then press {
pressing {V} or {^}, then press {
>}.
5
Press {V} or {^} repeatedly to select
the desired setting.
the desired setting.
6
Press {Save}, then press {OFF}.
TG5451_5452.book Page 40 Tuesday, November 16, 2004 9:03 PM