Panasonic kx-tg4321 User Manual

43

If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the 
batteries from the handset, and then insert the batteries into the handset again.

The unit does not work.

L

Make sure the batteries are installed correctly 
(page 11).

L

Fully charge the batteries (page 12).

L

Check the connections (page 10).

L

Unplug the base unit’s AC adaptor to reset the 
unit. Reconnect the adaptor and try again.

L

The handset has not been registered to the 
base unit. Register the handset (page 26).

I cannot hear a dial tone.

L

The base unit’s AC adaptor or telephone line 
cord is not connected. Check the connections.

L

If you are using a splitter to connect the unit, 
remove the splitter and connect the unit to the 
wall jack directly. If the unit operates properly, 
check the splitter.

L

Disconnect the base unit from the telephone 
line and connect the line to a known working 
telephone. If the working telephone operates 
properly, contact our service personnel to 
have the unit repaired. If the working 
telephone does not operate properly, contact 
your service provider/telephone company.

The indicator on the handset 
flashes slowly.

L

New messages have been recorded. Listen to 
the new messages (page 32).

L

New voice mail messages have been 
recorded. Listen to the new voice mail 
messages (page 37).

I have changed the display 
language to a language I 
cannot read.

L

Change the display language (page 14).

TG43xx_OI.book  Page 43  Tuesday, December 11, 2007  2:04 PM