Panasonic KX-TG5631 User Manual

For assistance, please visit http://www.panasonic.com/phonehelp

13

Connect the telephone line cord until it 
clicks into the base unit (

A) and telephone 

line jack (

B). Connect the AC adaptor cord 

by pressing the plug firmly (

C).

L

Use only the included Panasonic AC 
adaptor PQLV1 or PQLV256.

L

The AC adaptor must remain connected 
at all times. (It is normal for the adaptor 
to feel warm during use.)

L

The AC adaptor should be connected to 
a vertically oriented or floor-mounted AC 
outlet. Do not connect the AC adaptor to 
a ceiling-mounted AC outlet, as the 
weight of the adaptor may cause it to 
become disconnected.

L

The unit will not work during a power 
failure. We recommend connecting a 

standard telephone to the same 
telephone line or to the same telephone 
jack using a Panasonic T-adaptor (page 
9). Emergency power can be supplied to 
the unit by connecting a Panasonic 
battery back-up power supply noted on 
page 9.

If you subscribe to a DSL service
Please attach a noise filter (contact your 
DSL provider) to the telephone line 
between the base unit and the telephone 
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 29) do not 

function properly.

Hook

(120 V AC,
60 Hz)

To single-line 
telephone jack 
(RJ11C)

A

B

C

Noise filter

To single-line 
telephone 
jack (RJ11C)

TG563X_565X.book  Page 13  Tuesday, April 11, 2006  10:22 AM