Panasonic KX-TGA573 Operating Guide
Useful Information
16
For assistance, please visit http://www.panasonic.com/help
Wall mounting
The cordless camera can be mounted by the standard mounting or upside down
mounting.
mounting.
CAUTION:
L
Mount the cordless camera on the stable location where the unit can be adequately
supported when installing.
supported when installing.
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L
Do not mount the cordless camera on a soft material. It may fall down, break or
cause injury.
cause injury.
L
Do not mount the cordless camera on the following places: plaster board, ALC
(autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm (1
inch) thick, and etc.
(autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm (1
inch) thick, and etc.
L
Do not pull the call button wire after you mount the cordless camera on the wall.
L
After mounting the cordless camera on the wall, speak loudly and clearly into the MIC
when talking with the handset user.
when talking with the handset user.
Connecting the wall-mounting adaptor
A Slide the cordless camera into the wall-mounting adaptor in the direction of the arrow
until it clicks into the place.
B Tuck the call button wire into the hole on the side of the wall-mounting adaptor by
plugging the small wire fixture into the hole.
C Turning it slightly and sliding it in place.
D Fasten the call button wire to the hook of the wall-mounting adaptor.
D Fasten the call button wire to the hook of the wall-mounting adaptor.
TG5779(e)_camera.OI.book Page 16 Wednesday, February 14, 2007 11:04 AM